Chosen Solution My Samsung J5 Pro battery has been stuck at 85% of the phone. The same condition with charging with another J5 pro charger. What should I do now? I can not get the warranty, because of being a foreign phone. Samsung j5 pro charging not save Update (05/20/2019) Samsung j5pro charging not save
Chosen Solution It does not happen on an external monitor. It’s a band running up the middle of the screen, although it does not effect all pixels. Check the LCD. If your MacBook is still under warranty I suggest you take it in for warranty replacement on the LCD. Otherwise replace your display.
Chosen Solution when I tried to change the battery I unscrewed one screw but could not with the other one The screws do not need to be removed, just loosened enough to disconnect from the main housing. Is your problem that screw screw won’t turn? Have you stripped it? Are you using the correct Phillips head driver to try to turn it? have you tried to see if the screw is stripped or not
Chosen Solution I have a Visual Land Prestige elite9Q my unit will not power on the battery iws fully charged what can I do to get it to power on ? Thanks Have you tried reseting the device? Hold volume up and power button until you see the startup screen. tablet want come on charger keep coming out broke how can i get it fix can someone tell what can i do please...
Chosen Solution I’ve tried cleaning out the filter but I’m still having problems. If your Shark Navigator Lift-Away Pro no longer sucks up dirt, dust, and debris, see the Shark Navigator Lift-Away Pro Loss of Suction problem page for possible causes and solutions. If your Shark Navigator Lift-Away Pro no longer sucks up dirt, dust, and debris using the vacuum’s nozzle, see the Shark Navigator Lift-Away Pro Loss of Nozzle Suction problem page for possible causes and solutions....
Chosen Solution My washer will fill and then go to wash and wash for a couple minutes and then will hum and show the LD code is there a way I can fix the problem and how? Hi @michaela2021 , This link may be of some help Ld showed up on the timer
Chosen Solution Hey there, I’ve recently bought a replacement battery for my 5T.The replacement process went well, and all worked fine(for a bit). On the packaging(and here) it says to charge the battery to 100% and keep charging it(which I did), let it drain completely, and then charge it back up.Now, I did the charge up to 100% + the extra 2 hours yesterday, where everything worked fine.I let it drain over the course of today, and plugged it in when the phone shut down, just as described....
Chosen Solution i just replaced my screen on my iPhone SE, and while the camera app does open and the rear camera works, the front camera is just black? I can press the shutter button but it will not take a picture. do i need to replace my camera or is there something wrong with the phone? Replace the front facing camera assembly, sounds like when you replaced it it was either broken or defective....
Chosen Solution I have a Kenmore Elite side by side and my ice maker is not getting water to it. My inlet valve is not electronic, however the one for the ice maker is. I changed them out but I still am not getting water to the ice make. I have good water flow, I have changed filter, no frost build up on coils. I have waited for the ice maker to cycle and noticed that I am not getting any power to the solenoids at any time....
Chosen Solution Yesterday when trying to turn on my computer (I was receiving no signal. Just by messing around with stuff and turning stuff on and off, I fixed it. Today though I’ve been receiving no signal and nothing I try can fix it. It’s my only computer and it’s extremely annoying. Things I’ve tried: Turning stuff on and off again, ( for about half an hour) ,switching cables, switching inputs....
Chosen Solution Re assembled my moto z2 force but it cannot pick up WIFI now. Where are the antennas? Can they be reparied? ? Hi, Here’s an image taken from the Motorola Moto Z2 Force Motherboard Replacement guide showing the location of the antennae connections. This should help you to check both ends are securely inserted (click on image to enlarge for better viewing)
Chosen Solution Replaced old battery with ifixit battery last night. Everything went well, all connections made, everything secure. Only thing that went a bit poorly was getting all the old battery residue off the metal frame with the adhesive remover…. some strips were really too on there and, after a certain point, seeing how much force and mess it would take to get even a little off, I figured I could get by with the amount I already had taken off....
Chosen Solution Hi all, so I’m working on a friend’s Note 10.1 2014 edition, and she brought it to me telling me it wasn’t charging. I tried different cables, but the same thing happened - the battery symbol would show up (as drained) first, then the screen would start flickering. I left it charging for 2 hours and not even one bar would show up. Then I found this forum with the exact same problem....
Chosen Solution How do I fix the headphones so both sides are working? Cole Nagashima, you need to check a few things. start with the audio cable. Use a multimeter to check for continuity. Should the cable be okay, check the audio jack to make sure that all the wires are still soldered to it. If that checks out ok, check the wiring continuity from the audio jack to the non-functioning driver (speaker)....
Chosen Solution My Hisense TV that’s 2 years old has sound but an only white picture. If I let it sit on for a while (40 minutes) and turn it off and on (after it heats up) the picture is there. Is any help with it? Thx Hassan Alsulaiman sounds like your TV has issues with the signal. Try all other video inputs (Composite, Coax, HDMI, etc.) and see if it differs....
Chosen Solution I’m trying to reinstall OSX as I have in the past, the DVD passes the check stage, multiple components install, but I get an error saying it could not finish, please try again. I have tried 4 times already. I can’t get into verbose mode or the utilities on the disk to check if the HD is bad. Any other ideas? If you can’t get to disk utilities on your installation disk the optical drive has probably gone south....
Chosen Solution Hi everyone Hope your doing good. The top part of the iPhone has came apart and snapped and so have some of the cables. The screen smashed too but I have replaced this before so that should not be a problem. I do not know what parts I would need to fix this or it can be fixed. I had an idea to get a used phone, the same model and size (16GB) and swap the logic board onto that ....
Chosen Solution I can take pictures inside fine. But when I take a picture outside and go to view it. It’s just white. No picture at all? Sounds like your camera is letting in too much light. Try adjusting the aperture settings.
Chosen Solution my phone ask me for pin code what i can do ? Is it a phone subscription that you pay monthly payments. Or is it a prepaid card that is run out of funds. Because if it is one from a subscription I would go to your subscriber and if they can’t find out they will be able to, or they will get you an new card. (you will get a new sim pin code either write it down in a notebook or email it to yourself....
Chosen Solution Hi. My Pixel 4a got damaged when I was soaked in rain. Even though phone was inside the pocket, some water went inside. I didn’t notice it at 1st. Then camera started to fog which is when I realised. When there came an error & warning messages, all the ports got disabled. I immediately wrapped it up in tissue papers & kept it inside rice for a day. It didn’t recover, but the touch screen started to act weird....
