Chosen Solution My Xbox E console has a working power brick but won’t turn on! What should I do? Hello, this might be a problem with the power source inside of the Xbox, not the power brick.
Chosen Solution I was babysitting and my little cousin hit my screen and a white dot appeared last week and it has now taken over more than half of my screen with while lines , colorful lines, black dots . And when i move my screen or press on the back of my laptop it goes back to normal but never stays. I was hoping I wouldn’t have to pay to get it done but its starting to look like it ....
Chosen Solution The device when switched on shows the Samsung logo n thereafter the logo glows intermittently with no signs of starting. Also the battery is heating up n discharging n cannot put the set off. adalgado , A lot of times when devices are having these issues a factory reset is recommended. Reset procedure from link below. You will loose all data not backed up, when performing factory reset. Switch off the tablet....
Chosen Solution I have already tried different charger and pu different filemate tablet on my charger… Why won’t my tablet charge? lunakrazyshedevil71 if your charger work properly, then it is possible that you are having issues with either your battery or your charging port. Use this guide for the battery. While you check/change your battery take a look at the charging connector soldered to the logic board. You may have to resolder it or replace it....
Chosen Solution My Toshiba 43LF621U19 is not turning on. The blue standby light that used to glow when plugged in is not turning on. I tested the power board and the main board to the best of my knowledge and they seem to be working fine. I was able to read in 5V for the standby voltage. The power going in to my standby light board is ~3V. There is one connection from the powerboard to my main board and another that is labelled as 1....
Chosen Solution When i press the powerbutton on the ps3 it starts for some seconds, then it starts beeping alot then it turns off. What is the issues and what can i do? If at all possible, could you please record a video of this. There’s many things this could be and I would be able to better tell if i could see a video as there are different light colours and blink patterns that could help me answer your question....
Chosen Solution Can I use my Android with a otg Cable to connect iPad to iTunes? No, it needs to be a USB lightning cable. The only other ones that work are via the microUSB to lightning adapters.
Chosen Solution Recently replaced the battery of my 2009 13" MacBook Pro ( new battery sold by IFIXIT), as well as a fresh install of the El Capitan, however I am not getting the 10 hours of battery life as advertised. I would approximate as closer to 4-5 hours. I am wondering if my battery isn’t lasting as long as it should due to heating/cooling issues….any suggestions? First thing here is to reset SMC....
Chosen Solution Replaced 3gs battery with the one from ifixit but got trouble with itune error 29; use recboot to kick the phone out of recovery mode. The phone then performed badly including getting warm while on standby and short battery life (8 hours at most with average usage), and charging time is like 5 hours from 5% to 100%. Put back the old battery do a recovery with no error at all and everything working fine....
Chosen Solution 2019 16 inch mac book pro not turning on A fully dead system will need someone with deeper skills to diagnose. Time to visit someone who fixies Macs that has micro soldering skills these are not easy systems to fix! Or, find your way to an Apple Store.
Chosen Solution Computer is c75-7310 Windows 8.1- posted previous question tried different suggestions nothing worked. ‘Message on troubleshooting None of the networks you previously connected to are in range…which I am Also-a network cable is not properly plug in or may be broken…which on wifi…there are no cables…so I’m stumped…been trying to fix this now for over a week,helppp? delete device in device manager and click scan for hardware changes and let default driver install , if this does not work download driver from manufacturers website....
Chosen Solution Can anyone help shed some light on the problem below? (pun not intended) I’ve copied a photo and the model # below but basically the other morning I noticed the left hand side of the screen is now darker than the right hand side. It seemingly occurred overnight and all that changed recently is that one of the inputs (Sky TV) has gone from HD to UHD for some channels but I don’t think that would have any effect here....
Chosen Solution the lens used to work fine, but I dropped it. since then my camera says it is not properly attached & it will not recognize it. optical steady shot lens 1650 any ideas how to fix it? Hi, Simple questions first: Did you check if the electronic contacts got dirty when you dropped the lens? Did you look at a tear down, e.g. this one: https://www.youtube.com/watch?v=g9umAQ1-…. It seems like there are directly flat cables below the first 4 screws....
Chosen Solution hello, My phone uses EB-L1L7LLA any other Samsung phones use the same battery? My charging port broke so I need to find a similar phone to charge the battery and get my data, I’m not buying an external charger. I tried searching GOOGLE and no answers. Thanks Why not? Here’s a Universal charger for $8.99. https://www.amazon.com/Onite-Universal-B… Here’s one for $5, but not as high quality: https://www.amazon.com/Generic-Charger-U… I suppose any non-fast charging samsung phone would work, as long as it made contact and output similar current....
Chosen Solution my oven turns on and heats for about 4 minutes then shuts off?? If its an electric i can say this is a thermal fuse problem. Usually the one on top of the oven basket. These are round fuses and can be checked by connecting a continuity tester on it and placing it on the stove. Have a thermostat on there too. The heat should match the rating and it will then disconnect the current when it reaches its designed temperature....
Chosen Solution Panasonic RQ-W33V tape not working Hi @ldavinci I cannot find anything on your model using either number that you posted. The best that I can suggest is that you may have to contact the supplier in this link if it turns out that a broken rubber drive belt is the cause of the problem. You may have to open the player and check to find out if it is OK or not....
Chosen Solution Hi my panasonic tx-43gx555b was working 100% fine and all of a sudden the screen went black and I still could hear sound. I have changed the main power board and that didn’t help. When I shine a bright light at the TV whilst it’s got power I see some logos on the screen such as amazon prime. I’m unaware if the tcon board needs to be replaced, some posts say if I’m able to see logos with the power on the tcon board is fine and it’s a back light issue....
Chosen Solution Does anyone know how to replace the cable for the passenger door so that I can open it from the inside again it appears like a cable is snapped and I don’t really know how to get in there and replace it myself This is a relatively common issue on the forth gen Pathfinder, it’s less likely that the cable snapped and more likely that it disconnected from the handle, the point of failure is a C shaped bracket on the interior of the door handle, if that is in fact the issue, the handle assembly will need to be replaced (they’re relatively cheap, thankfully)....
Chosen Solution My iPhone won’t charge when connected to USB port Try using a different USB cable or power adapter. That may fix it. If not, there may be a problem with the lightning connector. Make sure the connector is plugged in. Also, it could be a battery problem. It’s probably Just yr cable, try another lead first. If won’t turn on still, just hold power & home button together till Apple...
Chosen Solution As the title suggests, I’ve got a broken fingerprint sensor and I’m wondering about my options for replacing this. Specifically: Is this a repair that I should do myself, or is this better done by a pro? I have the tools and I am handy, so I’m sure I could attempt this myself, but is it worth the risk, potential savings and bother? The part itself looks cheap enough....
