Posts

Chosen Solution Whenever I press L2 the left stick claims to move forward! How can I fix this? I initially thought that it was a dirt issue - that through whatever side effect the system would pick up soft forward motion on the left stick. After cleaning and no change in behavior I looked at the USB HID logs: In center position the left stick (ABS_Y) is at jitterung around 108 109 110 (the value range is 0…255) and the L2 - which is identified as ABS_Z is at zero....

Chosen Solution Hello everyone, I have a MacBook Pro 15" with Retina display, early 2013 model. One day I boot up the system, insert my password at login screen but the loading bar gets full without moving further with the startup. I have a 250GB SSD. I’ve tried everything, SOS reapir from recovery says all is good. I’ve done AHT and it found MEM error: so I’ve run Memtest+ from an usb stick for over 20 hours, no errors....

Chosen Solution Hi all, I’m in need of assistance trying to figure what is wrong with my MacBook Pro it’s been causing some unusual problems within the last month- nothing a smc reset didn’t fix. However, I️ left my MacBook unattended for all of 5-10 minutes, only to return to a white flickering screen and my fans blazing. The white screen will not go away no matter what I️ do. Any ideas?...

Chosen Solution Phone is not turning on. Keeps showing Samsung LOGO again n again Probably a shorted power switch. Take the phone apart and test the switch directly. If the switch has a short, go ahead and replace the switch and this should solve the issue.

Chosen Solution Hello. I recently replaced the glass back side of the iPhone 11. We don’t replace the glass it self we buy the frame with the glas already placed and just move the components. Been doing that since the iPhone 8 and never had an issue. I felt this repair went pretty well but when i started the phone and tried to test it, it just turns off. Right after it turns of it starts again with the apple logo....

Chosen Solution The phone was dropped but now the phone want come on screens not broke i can see something Hello, This can be caused by the damage on the screen, as the glass is not broken your Digitizer on the bottom (below the glass) can be damaged or bumped loose. You can find a new screen HERE You can find the teardown HERE I hope this helped you, Keegan

Chosen Solution i have a playbook and it won’t turn, the light flickers like it’s trying to charge and when i do plug it up it won’t charge, could this have something to do with it not coming on hi my playbook is not turning on just showing playbook on black screen its not going forword what can i do now what is the solution can u give me advaice...

Chosen Solution MacBook Pro 13” Retina Mid-2014 A1502 I’ve attached images to show what I’ve done. In troubleshooting my MagSafe board, I pulled up on the board connector rather than out (I should not work on my tech when angry.) Is this something that can be fixed either myself or by a microsolder tech? Or will I have to resort to a logic board replacement? I can get it to “sit” in the correct position (first photo), but obviously it will not stay Thank you for your assistance - I can provide any additional details needed....

Chosen Solution Got a new remote for my Samsung smart TV. I paired it by holding down the buttons and got the confirmation on my TV that it is paired. All the buttons work except the power button. It will not turn on or off the TV. The TV does not have a manual power button. Thanks for any help May be try a different brand of all - in - one TV remote....

Chosen Solution Hi I have searched for the most specific answers and tried many of the suggested solutions. None have worked as of yet. I’m hoping to narrow down what the next step is going to be. Here is what’s going on: Battery does not charge, one flashsing green pip onlyPower at DC in glows constant green, no change when turned or wiggled.Will not fully power on with battery inWill not fully power with DC only and no batteryCapsLock will light, but computer does not boot....

Chosen Solution I can only use my tablet (Galaxy Tab SM-T530) when is charging because while it is not charging it keeps on crashing and not booting Battery needs to be replaced. iFixit does not have the guide but sure you can find something online. When batteries are not performing well you will get some of the problems mentioned in your question! This is most likely a problem with your battery, I wouldn’t say it’s crashing, It’s run out of Battery....

Chosen Solution I purchased a used Late 2012 i7 with 16 GB of RAM & a 2.25 TB Fusion Drive that was running High Sierra, The computer seem to be working fine, until just before Christmas it booted once and I got the prohibited symbol. I had not yet moved things over to it so I did not loose much. I rebooted into recovery and reinstalled the OS. It worked fine for a few days then it happened again....

Chosen Solution stopped playing on my vr because i was moving and cleaning up the house and i just plugged it in and left it for 2 hours, i come back and i notice it hasnt been charging. so i change what wall its connected to and the charger and the charging block and nothing worked. im getting a little worried and stressed, anyone got any info? or should i hand it in to be checked on by a pro

Chosen Solution Good day! My Gopro hero 4 silver lcd screen won’t turn on. I’ve tried the troubleshooting instructions in Gopro official site like: turning on the display in setting options, ‘‘reset default camera", and update the camera online using my laptop; the update was a success but i still have the LCD screen problem. My Gopro hero 4 silver was perfectly fine the last time I used it 2 months ago and when I turned it on now, the LCD screen won’t turn on anymore....

Chosen Solution my a6000 LCD does not turn on after disassembling it for thermal fix and assembling it back. Everything else works just fine only LCD not turning on. What could be the issue, any idea and suggestions? Hi, With the camera on try shining a torch at an angle close to the LCD screen and check if you can detect any images at all on the screen, e.g. menus or picture etc....

Chosen Solution my sony laptop cover svf14c29l is broken and i need to replace it can you help me to get new cover and how to replace it thanks naji_81 , You can check the links below for replacement cover, also try a search your self using your (make, model #, laptop housing or case) for better pricing perhaps. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution I have three DualShock 4 controllers, one being a Scuf, and they all have this issue after having owned them for a year or so. While sprinting in game the character will just stop, and it’s often very hard to get moving again, requiring several attempts at clicking L3 while holding forward. Is this a joystick wear issue? As on the right hand stick on one of them it is very slow when rotating left....

Chosen Solution Whenever I try to connect my dell venue tablet to a WiFi network, it connects for a little bit then fails. I don’t know what the problem seems to be. Hi Donnelle, This has happened to me before. Try closing all the apps, turning the wifi off in the settings and turning it back on again. If the problem persists check if your other devices are not having a similar issue because if they are then the problem is with the internet and not the tablet....

Chosen Solution I just recently purchased a home with a Whirlpool french door fridge with the freezer in the bottom and another access tray in the middle. It is model GZ25FSRXYY0 - S/N K14105995. I can hear it running but it is not cooling or freezing at all. The previous owner told me that her children pushed some of the buttons on the control panel and it stopped cooling once before....

Chosen Solution When I put a game disc in my xbox it doesn’t read it. I don’t get any error code, it just says “open tray”. I believe that the optical scan is broken because I tried with many different discs and it shows the same “open tray”. Me and a friend tried to clean it but it didn’t work and if it’s dust it should work but it doesn’t. I just want to know whats wrong with it....