Chosen Solution Hello guys, My older hard disc (1tr that comes with pc) was damaged. I replaced it with 300 g HDD. After few days. It turned too slow something takes 2-3hours to turns on. I reformate it 3 times (windows 7-8-10) works little bit better in 7 and 8 but in win10 goes verry bad what should i do please. Is the problem on the processor or on the hard disc?...
Chosen Solution PN51E530A3FXZA Plasma TV will not turn on. Red light blinks every 10 seconds when plugged in. I have tried unplugging and holding the power button for 30 seconds. (One time the tv turned on for about 10 mins before it shut down again.) All other devices are unplugged from the TV. TV manufactured in 2012. Any Suggestions on how to fix? Thanks. You may need to replace some bad capacitors....
Chosen Solution I’ve had my iPhone 5s since December of 2013, and in this past few months I’ve had this issue start happening for the first time in the device’s history. I will be browsing (whether it be Facebook, YouTube, ect.) and the screen will start to glitch and become unresponsive, and then after a minute or so will turn black. It will still play audio and Siri is responsive using the ‘Hey Siri" command, but otherwise the phone is useless....
Chosen Solution After a power failure in my building the keurig won’t brew. The proposed remedy on the machine says needle maintenance is required. How is this done? patmob per Keurig: Step 1: Use caution and slowly lift the handle and remove the pod from the brewer.Step 2: Clean the needle by using the orange Brewer Maintenance Accessory. How to use the Keurig® Brewer Maintenance Accessory tool.Step 3: Perform several water only (no pods) brews....
Chosen Solution I can see the printer in the printer upset but when i press print the printer is not activated Joyboi as a point. But to answer your question, it looks like a connection issue of some sort. How is the printer connected? wired? wireless? is the driver up to date?
Chosen Solution Hiya, So I was having the issue where the power button was not clicking at all. So I was pretty confident it was the proximity cable that needed to be replaced (with the orange clicky dome for the power button). I followed the guide to replace it and after about 4 hours (took me wayyy longer than expected), I have everything put back together. My power button now clicks like new, but doesnt seem to work....
Chosen Solution an sd card was inserted sideways to the computer and the pins are bent. can this reader be replaced? or repaired? have you tried bending the pins back? If they aren’t broken, it might be worth a try first. Shorting with other pins might have blown things further back, if power has been turned on since this happened.
Chosen Solution its just showing white lines on screen and nothing else it has fell down from my hands exactly on screen and started to truoble me please say me what to do s ravi “fell down from my hands exactly on screen and started to truoble me” sounds like a failed LCD . Use a combination of these guides RCA RCT6773W22 Repair and this video to replace it.
Chosen Solution How do I get the code to unlock my tablet? I never set one up in the first place. I assume this is a lock code? If so, get the code from any previous owner. If its not available do a factory reset. (All data will be lost)
Chosen Solution my tablet keeps restarting minutes or seconds at times after opening an app then it freezes and restarts again.how do i fix this Try reloading firmware while retaining user data, and does it heat up? or normal temperature.
Chosen Solution My VCR turns off after about 3 seconds, and then starts flashing the CST.in light. I don’t visibly see anything caught inside, even after taking off the case. It does take tapes but due to it shutting off and not turning back on, I have to open the case and fish it back out. I have found people online with similar issues, but none of them helped me....
Chosen Solution laptop shows battery charge is at 100%. when I unplug the ac power the laptop immediately shuts down even with new ifixit battery. ive tried several different ways to reset it. looking for more suggestions. Hi, Just to verify that the battery is OK, create a battery report to check it status. Compare the Design Capacity value against the Full Charge Capacity value. With a good battery they should be nearly the same....
Chosen Solution Hey team. I have a microft surface pro 3 in the store, and i just did a screen replacement on it. The device wont show an image. I have gotten the charger in. when i plug it in, the LED on the charger turns on, and recognizes that something is there. The device’s Logic board gets warm, but not overheating. The fan stays off. The only sign i see of it booting, is that the device lets me charge a phone off of it, even while the surface is unplugged from the AC Adapter....
Chosen Solution Many fps games on the Nintendo 64 have forced inverted view controls. I want to open up a Nintendo 64 controller and switch places for the Y connections, so that the joystick itself becomes reversed in the Y axis. What cables from the data plug of the joystick are the Ya and Yb cables? Talking about this connector: https://i.imgur.com/rjlAg5x.jpg Erik Moreno test this with an ohmmeter. Connect the probes to the wires of the stick and measure to see which cable shows a change in resistance when you move the joystick through the Y-axis....
Chosen Solution I have a 99 accord that with out warning started running rough and then stopped starting. It wouldn’t do anything. When I plugged my code reader in to see if there were any codes, the car started but the engine ran very rough and if I unplugged the code reader the engine would instantly cut off. No codes but the only way to get the engine to run is to have the code reader plugged in....
Chosen Solution Getting this error message It sounds like the hard drive(s) died. You can change them, but you need a SATA I/II/III compatible SSD for this since it’s old enough to be from when laptops were still SATA I. I had to do a data recovery on one of the nVidia ones and they use SATA I drives, so I think these lack the SATA II BIOS Option ROM - if they even support SATA II....
Chosen Solution When looking for potential fixable devices online I see a lot of offers showing images like the following: What do you think about the screen’s health when seeing this? these watches are only useful for parts and even that will be limited as the SIP module is likely damage from water damage.
Chosen Solution A 1 inch wide portion from top to bottom on the right half of my Microsoft Surface Laptop does not respond to touch. However, the mouse works just fine and there is no problem to the other area as they respond to touch. Does the screen have any cracks or big scratches in it? One thing you may be able to try is run the Windows 10 calibration utility....
Chosen Solution Hi, How long do you have to wait before the standby light comes back on and that you can turn on the TV after it has shutdown? Also the “pop” sound might just be the audio turning off as the power is removed suddenly rather than being turned off in a controlled manner when the TV is turned of normally. If you can, try “muting” the audio and then check if the “pop” is still heard if and when it turns off....
Chosen Solution phone goes of and woun’t start up again for long time This sounds like a battery problem. iFixIt has a replacement guide here: OnePlus 3 Battery Replacement They also sell OnePlus 3 batteries, which you can find here: OnePlus 3 Battery If you need any help please reply to this answer. Thanks, John
