Chosen Solution I can see the background its like a layered screen …. you can see the apps at the bacground and theres a shadow on the side ts like an old photo Sounds like you are having some lcd issues. There is one fix that did work in the older models. Place you hand flat in the front glass and then the device over. Give the back a smack with your other hand....
Chosen Solution I turn on my phone and it shows the apple sign but as soon as it supposed to show the menu screen its blue and then turns into black and white vertical lines and some horizontal at the bottom. I never dropped my phone and it just happened out of nowhere Please help me find a solution, some people say its because dust may collect inside the phone...
Chosen Solution When I put my 3ds in a position the speaker pops and the 3ds turns off. And I cant seem to know why it happens. Please can someone help. Devices with mechanics like a door they have a really slim connection between the two parts, This connection (The Flex Cable) with normal use it start wearing out . Now talking about your 3DS this connection is really weak i fixed some of this models replacing the Flex Cables between the 2 Pieces....
Chosen Solution my spacer bar, shift, and delete keys are reluctant to work, what can I do? Did you have a liquid spill into the keyboard? Did the keycaps come off?
Chosen Solution I have sound and everything else in the tv works like it should but my tv screen is very dim i have another tv where it is totally black and you have to do a flashlight test to see it. This tv however is not that bad it is just very dim and changing any of the settings does not make it better it is always consistantly dim it does not fluctuate or get brighter or darker....
Chosen Solution @Damian Fick Can you change the charge rate voltage/time etc of the UPS to suit LiPO batteries? LiPO batteries charge at a different voltage per cell than SLA batteries. Also the cell charging temperature factor has to be taken into account Different charging principles (LiPO), (SLA) apply due to the different chemical nature of the batteries.
Chosen Solution Hi guys, my laptop (Asus N550JK, with touch screen - digitizer on the top of a matt lcd) Lcd broke down few weeks ago (purple/green tint etc) after some test i got convinced that the screen was faulty and decided to change it. The screen is lg philips lp156wf4-sph1 (written on it) and it seems to be matt and IPS, so i ordered one online and installed it (I received a BOE screen), the display “works” but there is no backlight....
Chosen Solution Hello! I got dead console, no recipe for gurantee so I’m alone. Console doesn’t respond on anything. Console is getting very warm when it’s plugged to original PSU. I think battery is charging because when i plug off PSU, for some time switch stays warm. What should I do? I’am thinking about new battery but this will not be that easy right? Maybe someone know what chip is need to be replaced ?...
Chosen Solution After having had the motherboard repaired for signal loss, I’ve put it back and everything works fine except the front camera. Rear camera works fine and I’ve tried 2 other front camera flexes which work on other phones. Any ideas apart from a motherboard which might still be faulty ? Hello Malcom, This is most likely another logic board issue. I believe this is the issue because I have this same issue on my iPhone 6....
Chosen Solution The L channel input isn’t working. It seems to be picking up some low levels signal of some sort every now and then, and on playback there appears to be an almost silent low level recording, but the usable recording is effectively mono (R channel only) I’ve opened it to try and see if there is a loose connection, but there is none that I can see, which makes it seem like the problem might be electrical / with the logic board....
Chosen Solution I was trying to open my phone to replace the battery, but when I opened it, the cable connecting the home screen to the phone was so short I couldn’t reach anything in. reluctantly, I was able to peel the home screen button from the screen on the inside, but when I got a good look inside, it doesn’t look anything like the diagram shows. I think there was an extra layer that was supposed to lift with the screen but instead, I separated them, and now I don’t know what to do....
Chosen Solution I have installed a new hard drive in my Lenovo PC and it is blank without an operating system. I have another hard drive in a inclosure I can plug into the PC. Can I transfer the operating system information from the old hard drive to the new hard drive and if so, how do I go about it? Yes you need to use a third party software cloning tool to copy OS
Chosen Solution It starts out fine then after about 5 minutes or so the top half of the panel starts flickering until, over the next 5-10 minutes or so, it eventually becomes mostly black. If I turn it off for a bit it’s fine then it starts all over again. Happens on all inputs and without any inputs plugged in. This is how it eventually ends up… Hi @tviv23, Looking at p....
Chosen Solution Hello Recently repaired a friends iPhones 5s. Initially was getting no service after repair and updating iOS appeared to resolve. Then phone died when testing, though all appeared okay so popped on charge. After changing, received the reboot and blue screen of death. Attempted to update iOS via iTunes to no avail. Assume two of the screws on the top right panel are wrong way round. Problem is the two pentalobe screws now won’t come out - they’re just spinning in place!...
Chosen Solution Basically my phone suddenly died and it wont come back on. I’ve left it in charge for hours with various cables and wall kits (including original). Is my phone really dead? I’ve also tried resetting the phone by holding the combination buttons. Any idea? me just like any other phone (device) start with replacing the battery. That will give you a known-good starting point. If your phone starts with that and charges you know it is the battery....
Chosen Solution My phone is hot to the touch and won’t charge. Is this a battery problem? well maybe the phone is over heated because you might have been on it for a very long time and the usb charger jack might have dirt in it take a cue tip and clear it out very carefully and take out the baddery then leave it out for 5 minutes and put it back in or the battery coiuld be the problem and you might have to get a new one
Chosen Solution Hello have a phone problem ,it doesn’t switch on the screen is black even after I changed batteries=== Hello geraldmtshali, install blackberry managerConnect the phone via m.USB cableUpdate the firmware if available otherwise you can do the repair the phone by blackberry manager Fallow the instruction Hope above steps will help you to fix your BB
Chosen Solution Hello, I replaced the battery in an IPhone 6S last night. I followed the instructions by discharging below 10% and charged the phone overnight. The level of charge displayed never got above 28% now it seems to jump up and down and the phone resets itself frequently. By seeing this might be battery not properly connected on battery connector.Check it first if the problem still same try to replace battery with new one....
Chosen Solution Hi Everyone I have a board 820-00165-A The PPDCIN_G3H should be at 18.5 V , but it is at 14.90 I see that PPDCIN_G3H comes from J700, which is the conector to the I/O Board. What would be the next step on this issue? Best First of all, Is it powering on? If PPBUS_G3H is at 8.56 I wouldn’t worry about it and I’d look elsewhere. Try a new DC in board and a KNOWN GOOD charger and it should be set....
Chosen Solution printer wont copy because it says it is out of paper and it has paper.Its a c310 printer. Check to see if there is a sensor lever near the paper pick rollers, sometimes it gets knocked out of its pivots and not be in position to detect paper.
