Chosen Solution I tried a lot to fix this issue but unfortunately no success. Please check this : https://cl.ly/a7bfaeaac957 Kindly help me in this regard Thanks & Regards Create another admin account. Restart. Login to this account. Test lid close. Alternatively, do you have any special programs that can prevent lid close. Going to ask the stupid question here. Did you didn’t disable auto shutdown/sleep when lid is closed?
Chosen Solution Won’t accept discs but it can eject them no problem when a disc is in it won’t read it either I would just change the disc drive. Easy enough and cheap enough to do. If you have any questions just let me know. Best regards!
Chosen Solution Have an old Seagate 30gb (Compaq spare part # 319413-001) with childhood photos. Any USB/converters that can be used to access drive? Hi @drphred, As far as I know this uses the old ATA-100 interface (aka IDE), and is in a 2.5" form factor. Your best option is to get a USB 3.0 to IDE / SATA converter.There are devices that support both 2.5" and 3.5" form factors, in the same device....
Chosen Solution I was going to pop the key but didn’t and know that after I tried it is loose what should I do? It seems like you partially disengaged the key. Try forcing the key back into place by pushing it directly down carefully but firmly, you should hear a click when it goes back into place. If that doesn’t work, using a thin sharp tool, carefully position it underneath the key and unhook the two latches that attach it to the top case....
Chosen Solution Before I got my current phone, I had an IPhone 5. I’m trying to get videos off of that phone but it’s dead. When I try charging it, it shows that apple logo like it’s going to turn on and then dies again and repetitively does this for ages. I’ve checked the charger and the charger is fine because it works on every other phone. Help? It’s a bad battery....
Chosen Solution I dropped my phone on a tile floor and when I picked it up I noticed that the overall screen was darker. I tried turning my brightness up and down but it didn’t work, I also tried changing the colours like inverting them and Turing on grayscale but it didn’t work. Please help, it would be appreciated. I would say there are two possibilities. You damaged the screen back light when it was dropped....
Chosen Solution After a hard reset when I turn on the phone it stays stuck in the first screen where it asks me to decide which Software I want the phone to use the jitterbug easy easy stuff or the more advanced android software It is asking if you are an advanced user, or if you want a simple phone. The “jitterbug” is for users that just want a simple to use interface, while the other option provides the traditional Android Software....
Chosen Solution Hi. I have a problem. My opel Astra G 1.6 16V has a problem, piston number 2 is not burning fuel/ gas. Whenever i test spark.. It’s there, but the plug is covered in gas. What could be the problem. How do I fix it. Hi Chris, How are you testing the spark? If the spark plug is working, it shouldn’t be soaked in gas, obviously. If you’re pulling the wire off the plug and verifying you’ve got spark at the end of the spark plug wire, that doesn’t guarantee the spark is getting through the plug into the combustion chamber....
Chosen Solution I tried soldering for battery connector fpc self-repair. However, there was a problem removing the original fpc parts, and it was further ruined while trying to solder them. Is it impossible to repair my motherboard in the picture? And can you introduce me to a repair shop that can be repaired? I have a new battery connector fpc part and a new battery. I see that the pad is missing....
Chosen Solution Hi, Im curious if it’s possible to use a new iMac without the display? I’d really like a Mac with a dedicated GPU but without the screen, since I already have two matching monitors that are quite good. I’d be willing to remove all the parts from inside the iMac chassis and place them in a custom case, and other modifications if necessary. Is this possible? If you remove the display it defaults to using the external ones....
Chosen Solution I have a 2013 MacBook Air and all of a sudden about 6 months ago, after it ran out of battery I couldn’t turn it back on. I took it to my local computer store who replaced the keyboard, but still same problem. So took it back, and they advised I’d need to replace the mother board or something? And that this would cost almost the same as a new computer....
Chosen Solution I have a samsung tv UE23ES5420WXXC with the power light flashing no picture no sound. Ive checked the power supply by disconnecting main board and the lcd lights up white. With the power board connected to the main board I get two voltage readings incorrect pin 11and 13 should be 85 volts i get 5.2 volts. . Update (07/04/2018) Update (07/06/2018) Changed the 100uf 450 volt capacitor and made no difference, it first started when watching the tv....
Chosen Solution Yamaha P-120 S The power supply jack has become loose, even “jiggles”. Is this as easy as replacing the jack, or perhaps soldering whatever is loose? I’d like to know if it’s fixable before I tear into it. @mikeghc here is the manual for it. yamaha_p-120_s.pdf. with that you can disassemble your Keyboard. The connector in question is JK101 and the Yamaha part number for that is V8149800 You can try and source the connector either from a broken board (it appears that most Yamaha Keyboards use the same connector) or you can measure the physical attributes and see if you can find a match at either mouser....
Chosen Solution printer says ink cartridge is empty when it is full. How do I fix this issue? Press the resume key about 25 second. Do it three times. Your ink statues will be reset.
Chosen Solution my ps4 is suffering from the pulsing blod. i can get it to boot up if i keep trying but it acts like it’s overheating and freezes up and when it does the pulsing blod, my tv knows it’s connected to hdmi 2 and renames the input accordingly. what could the issue be? apu, ram, the hdmi circuit, power supply? i hope it’s fixable One of the first things to try with a BLOD is swapping the hard drive....
Chosen Solution My harman kardon one portable speaker’s bass is not clear Bass .might be broken ,when u start to hear that most likely the speaker must be broken somewhere inside , this may happen if your speaker has been influenced by different type of weather situations that may cause the speaker material to break down after time ,
Chosen Solution Tried to charge the station with multiple chargers, and still isn’t charging. Make sure that you are plugging into the outlet completely, if it is only plugged part way it may not work. It is possible since you used multiple chargers that the outlet is not working properly. You should try another outlet and see if it charges. Look in the end of your charging cable. It may have one of the pins that had broken off and extending from the cable end....
Chosen Solution the title says it all, I’m trying to fix up an old LG 47SL80 flat screen TV but after it turns on, a few seconds later it turns back off. I think it might be my power supply board (it’s a model EAY58470001 REV 1.0 47SL80-UA) but when I opened up the TV I saw no issues, I’ve already tried cleaning it and that’s not working either. Do I need to replace the power board?...
Chosen Solution So i’ve been searching for a while but still can’t find an answer. My Xbox turns on for around 14-15 seconds the Xbox light comes on I can hear the fan come on, but then it just completely shuts off. I also can hear a buzzing sound coming from around the fan area it sorta sounds like it’s trying to power something up but can’t. I have tried power cycling but it didn’t work....
Chosen Solution Steering wheel on a 1988 chevy sidestep we need a bit more information. Is it the steering wheel that is loose or your steering? Is the steering sloppy and you find yourself correcting it continuously while driving? Do you have trouble moving your tires with the steering wheel? If so then you need to check where the steering shaft connects to the steering gear. Make sure that it is still properly connected and that there is not to much play in the steering gear....
