Posts

Chosen Solution Power LED when switching ON, flashes continuously GREEN for about 5 seconds and then steady GREEN LED - and no display on the screen - blank /“dead”. Under normal conditions, the GREEN LED will flash for about 3 seconds then “flip-flop” to RED status, i.e: TV is now in “standby” mode. Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board....

Chosen Solution Power window rolls down but only half way up on a 2018 Nissan Sentra driver’s side… What do I do? What tools do I need? Blessings to the helper! Hi @ladylearning , To avoid a long answer as to what may be involved here’s the service repair manual for a 2017 Nissan Sentra that may help. I realize that it is not the same year model but it should be similar Scroll down to Body Exterior, Doors, Roof & Vehicle Security and click on Glass and Window System and then when the document opens scroll down to p....

Chosen Solution my Samsung note 10 keep overheating I replaced the phone with o2 and it still overheating. Is thare any way replace the thermal pads There could be a number of reasons why your phone is overheating to apps running in the background to a short circuit on the board. The best place to start would be to do a complete factory reset on it and start fresh.

Chosen Solution Basically, my ps2’s video out seems to work fine… but when loading up a game the video seems to stop working, all sound effects still work, just not the video, I think it might be the display that I was using, when a game loaded up it just showed a single color, flickering bar of pixels at the approximate bottom of the screen, when tinkering around to try and fix it with my dad, he pressed one of the lid closed switches with a screwdriver and all sound stopped working, I still expect it’s the display… and then he tried to clean it with isopropyl alcohol, which in turn made the disc drive stop spinning up… from time to time when trying to load discs after all this the ps2 would just freeze and the only way to get it to work again was to unlpug it from the wall and plug it back in....

Chosen Solution I was changing the cartridges on my Canon MG5550. I left the machine for twenty minutes with the print head carrier in the access position. When I returned the display showed fault code B200. Prior to me removing the ink cartridges, the machine was working well. @muppet try this first: Turn OFF Power Open the print head bay (as though you were about to change inks) Turn ON power Wait for print carriage to start moving to the left and let it go past half way Before print carriage reaches left hand side (but after going halfway across) shut the cover....

Chosen Solution I turned my TV on and was watching it for about 4 minutes and the screen went black but the sound was still on what could be the problem? sicahaze3 …. vizio tvs have a real problem with burning out their main boards. before ordering one, youll want to check some basic things. (youll require a multimeter and the knowledge of usage for most of these) with your tv on and sound on, your main function of the power supply is functioning....

Chosen Solution tab c e0168 on opening stops at cyanogen and not to continuing continously You are in a boot loop. Boot into recovery, clear data and cache and reboot. If that doesn’t work, flash back to stock and try again. It will work if the device goes to download mode by pressing Power + volume down + home and then volume up to enter download mode. Flashing Steps for any samsung phone Try to flash the device with Stock ROM using odin tool, it will solve stuck problem at logo....

Chosen Solution I need rescue password for 2018 06 03 Hi All, For those having password issues, Please visit this link below. https://pastebin.com/L3c3rySj OR http://biosbug.com/asus.php Subtract current year and get the password e.g. 2018 - 10 = 2008 2017 - 10 = 2007 .. etc For example: At the password prompt, press alt+rTake note of the date displayed. For me it was 2017-05-11Use Ctrl+F to search the paste bin for your month and date....

Chosen Solution I am having issues with several of my keys on my keyboard suddenly not working. Have tried installing all new drivers, spent over an hour online w/ Asus Support re: same. They finally (unable to figure it out) said that I should replace the keyboard. I have obtained a brand new OEM keyboard from China and I now need some assistance on how to replace it. Can anyone suggest a resource or give me some direction?...

Chosen Solution Macbook Pro 13.3-Mid 2012 The drive is there and then it is gone. I put it in another MacBook not a Pro and it works fine. I believe it is the cable. I’m working on this for someone. I want to make sure I get the correct cable. I was going to order it from IFITIT could someone please let me know for sure which one I need? I’m not that great with Macs....

Chosen Solution So I recently installed macOS Catalina using dosdude1’s patcher on my mac pro 2010 model. After rebooting from the completion of the 1st installation phase, my computer rebooted as normal but it would not show any input on my monitor at all. The display input has always had a problem, i.e. while booting the monitor would not receive input until the computer is fully booted on the operating system macOS Mojave....

Chosen Solution I have a double amp setup for my truck. Arc Audio XDI 1100.1 for my 2 GS12D4’s and a Arc Audio 300.4 for my Morel 6.5" and tweeters. my 1100.1 failed first, about a week ago. It had been warm in the truck (108 degrees outside), but it wasn’t turned up, kept the subs down and the amplifier just started to cut the subs in and out and now there is no power to the amp....

Chosen Solution I have replaced the screens on many iPhone 8 Plus phones, but its only recently that I’ve been having trouble. Every single time I replace the screen, I have trouble with the customer not being able to hear phone calls through the ear piece speaker. I end up having to change the front facing camera cable. I use an anti-static mat, anti-static wrist guards and I’m extremely careful removing that component and placing it onto the new screen....

Chosen Solution I have 5 or 5 iPad 2s in my shop right now with wifi issues. After replacing the wifi antenna, the iPads will not detect any wifi networks. I’ve torn them down and made sure everything was connected properly but I’m not seeing anything. lil help? We have had this recently on 20 of them, turns out we had a batch of faulty wifi antennas :(

Chosen Solution I have a Mercedes 2004 C320 and will not shifting up gear it stuck in first gear on Sounds like you don’t have enough transmission fluid, check your levels.

Chosen Solution Why is it after i unroot my phone.. system update says operating system on your device has been modified in an unauthorized way.. Well, you can try flashing the stock rom through odin. That should possibly fix it. If no luck. Head over to XDA Developers. Those guys have answers for everything. And you’ll fund a forum specifically for that phone & rooting/unrooting

Chosen Solution My TC-L55E50 TV is blinking red light 16 times per minute. i replaced the T-CON board and the power board. Did not solve the issue.The picture comes on when turned on, but goes blinking right away. What should be my next step? Ayyangar Komanduri it would have helped if you would have measured that outputs from the board etc. first. Anyhow, for now all you have left is the main board....

Chosen Solution I bought a new pc parts from amazon and other sites rtx 2060 super i7-9700k 16gb ram 750 psu but when my friend built the pc for me it had an odd problem it was restarting without warning or blue screen (even if i did the option that prevents restarting without bsod) and this problem stayed for more than a month replaced my hdd checked my ram replaced the case for no reason at all checked the heating and now i heard that it might be the psu so i bought a new psu went to some repair shop left my pc there for a hour and a half (I shouldn’t leave it there ik but i was desperate and i trusted that place) and now then the place guy called me and told me the pc doesnt boot up it needs to stay in his place for two days i thought its some sort of scam (i went to his place before he told me your pc works perfect here it might be your house electricity and now he tells me out of nowhere that it doesnt work when my pc was working just fine before going to his place) so i told him no im taking it with me i returned home and yep....

Chosen Solution Hi, I’m getting a constant black screen on my Xbox One with no picture at all, I’ll run through what I have tried so far and try to include as much detail that I’m aware of as I don’t know what the next step is to identify the problem. When I turn the console on, the power lights come on fine and can apply updates via USB (I get the correct sequence of beeps) but do not get a picture at any point....

Chosen Solution Hey iFixit, I made an idiot mistake. I was removing the CPU heatsink on this IdeaPad 11S, and while removing it I popped a small chip off the board, the name of the chip escapes me right now, but I need a way to get it back on, only one solder point is disconnected. Any help is appreciated. That’s easy just get a soldering iron, some flux and solder....