Chosen Solution I’m having a problem with just no sound. What can we do? Latosha Scott of course you always want to make sure that your settings are proper. After that make sure that your volume is up (yes it does happen) Once you know that all of that is okay and you still have not sound, check all your video inputs. Try different input sources and see if that changes anything....
Chosen Solution the screen says: error…..PICK MOTOR STALLED….PRESS HP OfficeJet Pro 8600 plus pull paper tray out and check printer for a paper jam. Its not picking up the paper from the tray.
Chosen Solution My pro fell onto the floor and had a small crack from the inside creating glitched lines up the screen. That happened on 1/31 It’s now 2/8 and it’s gotten much worse I have no clue about computers and don’t know what is wrong or what to do Hate to say it, but you’re most likely going to have to replace the screen; if you arnt’t up for a challenge, you could take it to a tech repair shop, or you could follow the instructions found here....
Chosen Solution i just got hulu app and it wouldnt work on dex mode, so i used screen mirroring. first night, screen turned weird green but i turned off and restarted my phone. and it came back to normal. next night, i used screen mirror hulu again , and when got up screen was dead. turned off rolling green lines when power on. then black cant see anything. it goes back and forth between these two states....
Chosen Solution My switch made a pop noise gave me an error code that told me to turn it off I was downloading a game at the time. Once I turned it off it never turned on again could someone give me an answer? Hello. I do not know what error code you got. However, this link might help you diagnose your problem. https://www.gamepur.com/guide/27483-nint… Hope it helps.
Chosen Solution Well I tried turning the screen on but it comes on but it has lines and slowly de luminates and the turns off . Can you tell me what is wrong? Is it fixable ? Sounds like the LCD is damaged. If you have taken the device apart, check that you put in everything correctly and if that’s not the case, you may need to replace the screen of the device....
Chosen Solution My Tablet at first was doing slow charge and 1/3 of the screen was gray, then it would take a long time to charge like a full day just to charge 2/3. Then it just stop charging, now its dead and it will not charge. Assuming no water or drop damage: If you plug it to the charger and you see response from the tablet such a charging light most likely you have a battery issue and it needs to be replaced....
Chosen Solution iPhone 8 Plus wireless charging stopped working, tried on 3 chargers, can this be repaired. Usually, this can be repaired. The wireless charging coil can be replaced, but if the circuit is damaged, you may need to take it to a microsolderer.
Chosen Solution It just doesn’t work. but the rest of my controller does Could be broken internal hardware? Do you tend to put a lot of pressure on that button? If so, you may need to take it apart and check the hardware that activates the button underneath. Also, you could try a little compressed air to clean the joystick, and all the other internal components. That should fix it.
Chosen Solution Hi everyone, My problem is that, i have just bought a Redmi Note 2 online. For the first three weeks the mobile was ok, but later this week the xiaomi phone is not taking charge. I have changed the battery twice , i have even change the adapter and the USB cable, but the item is not taking charge at all. What should i do, or what is the problem....
Chosen Solution TLDR: (click to view full img) The issue is after the back light has been burnt, I need to weld them to alternative point by jumpping wire. Am I linked the cable order correct? or incorrect in some links like the graph showing below? (Also I am not confident for 1-10, the link 5 maybe also wrong since it does say ‘not connected‘ in the boardview.) Long story: I splitted a cup of water on the top left corner and watched the screen flashed into white and going off in under 0....
Chosen Solution Where is the adapter switch located Older model Toshiba the wifi switch was located in the front right side of the laptop. If it’s a newer model they don’t have switch’s its all controlled by program software which you click on or off. Which exact model do you have?
Chosen Solution I replaced the battery on my Surface Pro 4 the other day. Now I’m seeing no fan spin on power up and no ‘Surface’ logo on boot up. Am I missing a crucial step in reinstallation? Is this a common occurrence? What do I do? I’ve got the same problem. Did you find a solution for it in the meantime? For what it’s worth, I found this site that seems to have a possible solution....
Chosen Solution I’ve bought a iPhone and I replaced the screen on it as the screen was completely smashed and black but I have no signal, I think it has something to do with the antenna but not sure Check if the IMEI and modem firmware is being displayed in settings > general > about phone. Also check in the phone dialer with *#06# for IMEI being displayed. In most cases these are baseband circuit related issues which requires micro-soldering from a reputable phone repair store to fix....
Chosen Solution My BB Leap is non-responsive. Touch screen, on button and and all other buttons don’t work. When plugging in the charging cable, the screen goes on and shows it’s still on and does still charge but nothing is working. Holding down the on button to do a hard reset doesn’t work either. No incoming calls or messages. If none of the input properties on your phone are working, then there may either be a loose connection to the main circuit board of the phone or a damaged main circuit board....
Chosen Solution When turning on the Mighty Dwarf to the micro SD side of the switch, it slowly slides back to the off position. How can I remedy this? Better late than never I guess Had a similar problem, that has worsened since then, in my case it’s the switch itself that is the problem. Seems like the switch is of an inferior quality. But wouldn’t recommend to solder it off just yet, maybe check if there’s gunk in-between the switch and the switch-arm....
Chosen Solution my drone won’t fly rite how do I fix it? Check the winding resistance of the suspect motor against the others - open circuit. If it’s okay, then you need to trace it back to the driver & change it if it checks out faulty or just order another controller board.
Chosen Solution I have a 360 console that was banned due to a ridiculous course of events. The console was never modded, but Microsoft thinks otherwise. This is because my friend who has a modded console put his HDD in my Xbox and it was then banned. Awesome! My Problem - I use my xbox to steam movies/music to my TV in my living room. Since i cannot connect to XBL (Xbox Live) I cannot watch movies or play music without downloading the Optional Media Update....
Chosen Solution Just replaced the SUS board TNPA5335 in my 50 inch LED TV because of the 7 blinks problem. The new board gave me 7 blinks as well. So part of my diags was to switch on with the ribbon cable detached from that board. That gave me 8 blinks. But now with the ribbon cable reseated I still get 8 blinks on power-up. I can’t even get it back to 7 blinks again....
Chosen Solution Hello, When I first bought the S6, I charged it to 100% and switched it off; but then I went to get a SIM card for it and tried to switch it on, it wouldn’t. I went back home and charged it (turns out it was 0%) and everything was normal for a few months. The same phenomenon occurred again later. But that’s not even the problem. Usually, the battery takes a long time to drain....
