Chosen Solution After moving the Motherboard out of my iPhone X and place it back again, the phone won’t power up. Did you guys experience the same? if not, what could have gone wrong with my device ? My only question is why? This is a brand new phone, why would you do that so early in its life. But my recommendation is to remove it again and double check everything looks good and all connectors are plugged in....
Chosen Solution My Pixel 3 is completely dead. No light, no vibration, no reaction to any button presses. If I put it on a wireless charger, the charger recognizes it, but then stops charging immediately. If I plug it into a USB-C power meter, it recognizes it’s connected but doesn’t charge. If I connect it to a computer, it doesn’t list it as a newly connected USB device. I noticed the battery was bulging, so I replaced that with the ifixit replacement....
Chosen Solution when I ask my printer to print with WiFi it can take a long time to print. Depends on your router, distance between router and printer, driver settings. There are lots of factors that can be part of that problem. Try to connect printer directly to PC wait for driver to install and print some documents. After that - repeat print same document - through wi-fi. That way you cut off driver setting....
Chosen Solution My screen shatered on my Nexus 5X. Took it to a repair store, replaced screen/digitizer and now when I make a call (push the green button) the screen goes black, same when I accept a call. Only way to fix it is to reboot if no one answers. Hi, the issue is with the gasket that the sensor fits in. The repair shop has most likely left it on the old LCD....
Chosen Solution I recently bought a mid-2010 Mac Pro 5,1 from OWC and using it in one day the power button pushed in. It still kinda works. I have to be very careful about powering it off and on. I was using it a lot to upgrade to High Sierra. Needless to say, I would like to know where I can find the part or a guide on how to fix it....
Chosen Solution The screen will bounce from Safari to the desktop to mail, etc. Also, the pointer bounces around erratically and sometimes zooms in. I suspect you have a bad trackpad. Did you have a liquid spill at some point? Or. have you cleaned your system using a spray cleaner? In either case the wetness got into the trackpad and you’ll need to replace it. To verify you can disconnect the ribbon cable from the logic board and see how a USB/wireless mouse or trackpad react....
Chosen Solution My speaker plays nothing but static, i think i need a new one, but I don’t know how to. Can someone help? Static is the number one sign of a damaged or blown speaker in a device. Luckily, the speaker assembly in the Zeepad 7DRK is not very difficult. Check out the Zeepad troubleshooting page for this device to see more common audio issues: Zeepad 7DRK Troubleshooting We hope this helps....
Chosen Solution i can`t press in the start buttom Open up the computer and see if you can unjam it from the inside (depends on what kind of switch it is). BTW, using DW-40 as a lubricate is not recommended for electronic equipment. The following might be of some help Dell Optiplex 745 Small Form Factor Repair
Chosen Solution My USB charger is loose and keeps dying when being charged Leon Francis some are easier to fix than others. Like this one OnePlus 2 Charging Port Replacement which is straighrt forward. It will all depend on which model you are referring to.
Chosen Solution I got a dell m4700 from a friend but it doesn’t work. He told me “I upgrade the ram and tried to change the thermal paste but I didn’t know how to do it so I didn’t and now it freezes on the dell logo” I replace the thermal paste and it still doesn’t work but I found board damage so I would like to see someone’s laptop to compare....
Chosen Solution My display screen is cracked. Is there any way to change the display screen and not buy the whole lcd panel? Will changing the lcd panel solve the problem ( does purchasing the lcd panel include the outer screen?) or do i have to buy the whole display assembly? Thanks. Well, you could have either cracked the glass, or the glass and the LCD panel underneath. If you can still see an undistorted image under the cracked glass, then the LCD panel is fine and you will only need to replace the glass....
Chosen Solution Hello, when I opened my iPhone 5S it seems that I broke my Home Button Cable so that after assembling the phone again, the Home Button does not work any more. Can I buy this part individually or do I have to replace the whole button? I’d really appreciate if you could tell me which part I have to buy to fix this one. For a picture of the damaged connector cable, please see the photo attached....
Chosen Solution I have a MacBook 13 mid 2010 and need to replace the optic drive. Two are offered for purchase under this model but which is the correct one. Here’s how to do it: MacBook Pro 13" Unibody Mid 2010 Optical Drive Replacement Here’s the drive that comes with the your model, the other one is earlier and will work: MacBook Pro 13" Unibody 8x SATA SuperDrive (Used)
Chosen Solution My old battery wasn’t holding a charge. I’d leave the machine asleep in the corner and it’d be dead by the next day. So, I bought a new battery and replaced it. I calibrated the new battery per the enclosed instructions, but now the percentage is dropping as quickly as it was before. I am sure that I did not reinstall the older battery….. Do I have deeper problem or did I screw up somewhere else or is the new battery a dud by chance?...
Chosen Solution Faulty hard disc needs swapping out. Do I need to clone the old drive for operating files to establish replacement and get the machine going? Or can l just install black disc and download new set up from the web? David Brown “Your Xbox One console is not capable of formatting a replacement hard drive for use as the main drive. Before you install your replacement drive, you will need to reformat the drive in a computer and install the necessary software ” check Xbox One Hard Drive Replacement on here how to do all that....
Chosen Solution Cannot turn on with remote or button on TV. Unplugged power brick, waited overnight. Applied power again. Got a brief Sony logo on screen, then it went dark. I have repeated the power disconnect/reconnect several times. Results always the same. No picture (other than the Sony splash screen), no sound and no blinking lights of any kind. I notice that after the splash screen the display has a very dark purple-ish tint until I remove power....
Chosen Solution My device after replacement of touch screen not responding to battery charging even not Power ON /help me to fix this problem Hi there. I’ve Micromax A102 Doodle 3 phone but since yesterday it has stopped working and is not getting switch on. If I connect the charged only the red light is shown on the phone but no charging logo or anything on phone. Tried to do Recovery mode but when it ask to press the down volume button for (OK) it again gets switch off....
Chosen Solution Hi, I followed this link - - - > MacBook Pro 15" Retina Display Mid 2014 Battery Replacement I have all the tools and an anti static mat but after going through this 3 times my Mac will not boot. I get an amber light on the Magsafe charger, if I SMC reset the light goes to green but the Mac simply will not start. No fans no display , nothing....
Chosen Solution MacBook 13 2.0GHz Core2Duo A1181 UK/Late 2007 a few months back my machine was powered off but connected to the mains. lightning must have hit the lines the other side of the island – the screen flashed momentarily, and a little ‘dink’ / ‘pop’ sound… I was awake, and saw it happen. since that time I have had quite a lot of intermittent trouble. The battery has popped ( finally I am ordering a new one )....
Chosen Solution I have tried everything, I can think of to fix it. Yes I have restarted it several times. Please help Do you know where the trigger is? this is usually a piece where the door connects that gets pushed in and out to detect if its closed or not. Try pressing down on this and try printing at the same time
