Chosen Solution My washing machine won’t completely drain all the cloths out leaves them soaking wet and the only error code I have is for a lid switch the model I have is a wtw5000dw2 The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already....
Chosen Solution ok after i opened surface pro and with metric duckload glue…… what kind of glue i should use to glue back the screen ? or do i have to use the same old glue warm it up ? and reglue the screen with ? Heating up and cutting the adhesive will most likely render it useless for resealing the device, so you’ll probably want to scrape off the old adhesive with a plastic tool, and use foam double sided tape to reclose the device....
Chosen Solution OPPO BDP-93 Blu-ray player Symptoms: Connecting the power cord the red standby light comes on.Pressing the power button (or remote) and the light changes to blue, unit screen displays “HELLO” then “OPPO , but no “Home Menu”.TV displays the Blu-ray splash screen but that is all.Blu-ray drive spins up, laser head moves, does a brief “search” and tray can be opened and closed with button or remote.Fibre optic light is on....
Chosen Solution I have a Macbook Pro A1398 late 2013. When I connect the Magsafe charger the green light comes on for about 3 seconds then it turns orange and remains orange even after several hours. SMC Reset tried. No chime, no trackpad click, no fans running, etc. when pressing the power button (on keyboard). I have heard that there are two PCB pads that can be shorted to try a restart without the keyboard power button, but I have not found any references for this model of MacBook Pro....
Chosen Solution Hi all - I have been searching online and I see lots of posts about the blinking red light - what about if the light does NOT blink? Unit powers on - red light comes on - picture then immediately turns “gray”. Remote / inputs wont respond, nothing appears on screen. Red light does NOT blink. Remote WILL turn it on and off. Meh? Anyone else encountered this?...
Chosen Solution i have a hoover hurricane which works ok but the pet hair removal attachment has stopped working, i have put it in my friends hoover and it works, i have cleaned all the filters and the dirt bin but it still does not wok? Hi, Did you check if there is a blockage in the hose? Here’s a link that may be of some help. Scroll down and click on No Suction not picking up > Check for Blockage in hose....
Chosen Solution It always shows the notification that charging connected device via USB, although there is no device connected. When I plug in a charger, it does not charge. But when I open the USB preferences and change the USB-connection to be managed by the pixel and plug in a charger at the same time, it works. I was using this option to charge my phone for a while, everytime I connect my charger i change the setting in USB preferences, now that has also stopped working....
Chosen Solution so currently im trying to get into download mode when i do “VOL down, power and home button holding it at the same time will send me into the do you want to install a custom OS. when i press the volume up to confirm, it puts me back to the “an error has occurred screen.” any help would he helpful! This seems to be a common issue with Samsung Phones....
Chosen Solution I bought used and have no password. Is there a hidden reset button to let me log in with no password Do you see the password right when you turn on the computer or when it loads the operating system. If its almost immediatley after you turn it on, try to remove the battery and also the CMOS battery. Remove both and leave them out for atleast an hour and then put them both back....
Chosen Solution What can I do to fix this? Double check the wires that is ok and completely ok without worn or damage on it. Try to reset the adapter using this link http://en-americas-support.nintendo.com/… If nothing work you can try to ask in a local repair center to diagnose what is burned inside the wii board. That might be a coil or in the worst case have GPU damage an need to replace the GPU chip…....
Chosen Solution theres 2 things im worryed about the power brick and the battery itself so ill began with the power brick ok i use this laptop falry alot for work light gaming so on its on either in sleep mode or on all day every day i dont push this laptop to the limt tho i do push it a bit since its a laptop it needs to be chraged and since its on all day i charge it while using it and when its full unplugh till low and repeat the procces all day but escpaly when im gaming the laptop power brick gets a good bit hot and im worryed its getting to hot is it normal?...
Chosen Solution Was playing the speaker. It stopped on its own. The power button stays on wont turn off. No other buttons work. Less than a year old. Help please Hello Rhona Try the following steps (reset the CHARGE 2+): 1.In power ON mode press and hold the “Volume +” and “Phone” buttons at the same time for more than 3 seconds until it shuts off by itself. 2.Unpair/Forget the CHARGE 2+ from your device....
Chosen Solution so my mother hit the hdd on my ps3 slim and i did not lose a little game info. ok all of it but i mainly play online… but anyway when i press the power button to turn it on i hear the beep but then after a while i still see no os saying welcome i just get a black screen no hdd activity and the only way of powering it off is to unplug it....
Chosen Solution The printer will not pick up the paper to feed it into the printer. It displays the load paper into main tray message even though there is plenty of paper. It seems like it could be a paper sensor issue. Do the rubberized wheels spin, like it’s attempting to grab paper? If so, it’s possible that the rollers are dirty, and it just can’t generate enough friction to grab and handle the paper....
Chosen Solution I recently had to replace the screen on my iPhone 6 but when I turned it on there is a think black line down the right hand side of the screen as well as a ghost like look over the screen. Just if you can help me fix the problem. You can try to reseat the connector of the lcd maybe this will help, otherwise you have a faulty screen and have to replace it....
Chosen Solution My PS4 Pro turns on flashes a blue light, beeps once and turns off. Then nothing . Is this the power supply? It can be a power supply or an APU issue (bad solder joints). Can you post a video of the issue?
Chosen Solution While playing smash bros. I use a GameCube controller and when the right bumper is pressed the game will sense that the button is still being pressed and will stay in shield. This doesn’t happen to other controllers. I’m wondering if the sensors are dirty or not. Should I look into getting a new controller? Button is sticking most likely because of dirt and dust. Take apart and clean it....
Chosen Solution My camera stopped taking pictures and videos a few months ago. I’ve checked the shutter and it works well. It’s just that everywhere I shoot the picture looks completely black. I’ve formatted the camera a couple of times and checked tons of different configurations but none seems to work. Any help? Btw, I tried to turn all the way up the exposure of one of this black pictures and it turns out the image actually gets some information...
Chosen Solution Hi IFixit community I have a 2.5 year old Sony Bravia 49 inch LED TV (KD-49XD8005) which wont turn on any longer. It happened after an incident when I was plugging an HDMI cable from my TV to my desktop computer. The TV was plugged in, and turned on. Without thinking about it, I tried to connect to my desktop and a few sparks jumped from my graphics cards HDMI port to the end of the HDMI from the TV as I plugged it in....
Chosen Solution why wont my speaker charge and how do I determine whether the charging port or the battery is gone bad and how can I get replacement parts gcbarber if the schematic would be available one could simply check the power supply line and thus check to see if the charging port works. But it is not available. So at this time you can change the battery first and see if that resolves it....
