Chosen Solution So a while ago my 2015 1st gen Nvidia shield front touch buttons stopped working, and I thought it was a bad 12-pin cable. It turns out it’s the touch buttons (nvidia button, home button, back button, and play button) that stopped working. I have searched far and wide for a replacement but haven’t found anything. Can anyone direct me to where I can find one? Thanks for responses in advance :)...
Chosen Solution Whenever I calculated NPV,the calculator switches off itself. And then after 5 min it automatically become rst. Please suggest me something. I’m not too familiar with the BA II Plus, but it could be the battery is nearly dead and needs replacement. Texas Instruments TI BA II PLUS Battery Replacement
Chosen Solution I bought a new logic board for my iPhone 7 thinking that it was going to work with the old touch id but it is didn’t pair. Is there any way I can pair the old id with new logic board The home button is paired with the logic board at the factory for touch ID. From experience and what I’ve read, I believe there is no way outside of the factory to pair a home button and logic board....
Chosen Solution My Panasonic Viera TX-P42S21B 42" 1080p HD Plasma developed a fault a few days ago. It looks like it’s going to come on, makes that click sound but then goes off. Doesn’t turn on via remote. So, obviously it’s likely one or more of the components/boards. I don’t see any results for my model or a service manual anywhere, but I’ve briefly looked into it with similar models and apparently it is the SC and or SM board(s....
Chosen Solution New boots showing wear after being worn 4 times. Would a coat of silicone protect against wear? You may be able to use silicone to rebuild your worn outsole, though the success of this repair might depend on the product you are intending to use and the type of material your outsole is made out of (leather, rubber, etc.). A tried-and-true product specifically used for shoe repair is Shoe Goo....
Chosen Solution My phone freezed and I taked out the battery and put it back. When i tried to turn it on its just showing the phone model and nothing more. I can´t do the hard reset it just freezes the screen. What should I do? Hi, You can try to enter in DOWNLOAD MODE with POWER + VOLUME DOWN and load the stock rom again with Odin does the phone try to boot as soon as you put the battery into the phone?...
Chosen Solution My LG tv has a picture but it is only on the top right hand side of the screen. TV is probably 5 years old. has been working properly until recently. dont know what to do to get a full screen picture. Have you perhaps enabled a mode called “Picture in Picture”?
Chosen Solution I get a screen full of white specks , like stars , even when a video is playing Is there anyway to fix that? If you can bring the spots into focus making the projection way out of focus, then it is dust and could possibly be cleaned, would have to completely tear it down. If the spots are in focus with the projection and look like individual pixels then it is the DLP chip....
Chosen Solution Hello Guys, i got a problem with my iphone 5G. the iphone works perfect but the battery drain is very high and after the battery is empty the iphone stays off but after a while the battery doesnt work anymore. iphone turns on and off normal. i changed the battery same issue. high battery drain (12hours) without using it and after battery is empty battery wont work anymore. any suggest?...
Chosen Solution The power cord to my daughter’s player is broken. It’s always been touchy/positional. The tip is so small, can’t seem to find a replacement. Got any suggestions on where to order? Thanks! Diane Need to know the barrel size and voltage to find one. They are easy to get once you know that. Update (05/01/2016) Or Google http://www.amazon.com/UpBright%C2%AE-Mi3…
Chosen Solution My receiver turns on and then powers back down @rule run the error detection service mode first. Then start off by checking your power supply. Use the Pioneer flowsheet and a good multimeter to check those things. Let us know what you find. It’s going into protection Mode. You need to either use a factory reset or take it in to have it serviced. Relay or something I don’t know
Chosen Solution My machine is still under warranty. I’ve had 2 previous repairs from their authorised repairers. 1st repair: trackpad stopped working Replaced: Trackpad, Trackpad Mylar, Trackpad cable, FPC and battery. I sent this back as the trackpad wasn’t seated properly, and a key on the keyboard didnt work. 2nd repair: trackpad not seated right, and key not working Replaced: MAINBOARD and Battery? AGAIN? Now the machine is powering on (lights come on, fans are on, but no display....
Chosen Solution I have a 2010 21.5" iMac that does not work with the internal LCD. I have replaced the logic board, display, display cable and the LED driver board. the internal display still will not work. Could the graphics card be bad and still work with an external display? Could it be the power supply? Everything else works on it except the internal display, no backlighting or anything. Thank you...
Chosen Solution I’m working on a sony 46" Bravia S Series lcd tv, when moved, something inside the tv raddled. Not quite sure what that is. When turned on all it does is light up, but the screen is nothing but black. I tried to press the menu button, and change the inputs, nothing made any changes to the constant lit up black screen. Going to attempt to disassemble tv to find source of rattling noise....
Chosen Solution My wife had her Gateway laptop for years and in the last 3 plus years I has stopped turning on. It doesn’t power on even after I recently purchased a universal laptop charger and tried it at 19v which is the required voltage. I’m thinking the battery may need to be replaced so I may try that next but wondering if anyone else has had a similar issue and if there may be an easier fix....
Chosen Solution hi, my printer doesnt detect paper in the tray and the out of paper message appear, load paper in the main tray. Which I have obviously done. I have checked for any paper residues or jams, clean the rollers and all accesible parts. tried resetting to factory setups but nothing is working …. Iver had this printer for 6 yrs, I think it had his time …. But if anyone has an fixing trick for that one, I would like to try fixing it to give it to charity....
Chosen Solution just yesterday, it can still see the camera and I can download photo. Today, it does not see the camera. what is broken? Hi Julia, If you are using a windows computer and the PC does not recognize the camera then I would go to the windows control panel and under hardware and sound locate the device manager. Open device manager and see if the device is listed anywhere....
Chosen Solution Even after I installed a new usb port, my phone still won’t charge. It started off by only charging when I would connect the cahrger at a certain angle. Sometimes it would say it was charging when nothing was connected to it. Then it stopped charging completly. Now I connect the charger and it doesn’t even notice it’s plugged in. Anyone know what is going on? My mic still works, so does my service antenna....
Chosen Solution My galaxy S6 phone won’t turn on. I took it out of my pocket and I couldn’t turn it on. i didn’t drop it or get water on it. It wouldn’t turn on when I checked my phone. I charged it but there is no indication on phone it is charging. The first thing I would check is the battery. If you are comfortable opening the phone, I would try that first....
Chosen Solution My cell phone works great except when I am in my house. I have had the phone a little over a year with no problems. All of a sudden the screen goes black. Phone is still on as I can hear when I adjust volume, just can’t see anything. When I go outside my house, the phone goes back to full color screen when I press the side button....
