Chosen Solution I have an Nvidia Shield TV box that included the regular remote Model P2575. The battery will not charge any more. After opening the device i found a Nvidia 3.8v 1.4wh battery with model number 027-0033-000. An extensive search of the internet revels that battery model C1101410 that is manufactured for an ASUS smart watch has the same dimensions and is identical. model number 027-0033-000 comes up empty....
Chosen Solution Left side for one inch does not respond to touch it’s visual but no touch response Update (06/27/2019) The model number is NX16A8116KA Paula Goble this is usually caused be a failed touchscreen. Going by your model number is difficult since there are no listings with that. It appears to be a Nextbook Ares 10A NX16A but we would need more information on it to be sure. I’d check the rather mediocre video on here to remove the digitizer etc....
Chosen Solution One of my lens covers is “lazy” only opens part way. I can flick it with my finger and it opens all the way. How to fix? It’s usually something sticky or dirt on the lens cover shutter. you should be able to clean it or use a very light lubricant on it. Be careful not to get any on the glass lens.
Chosen Solution My phone often restart mysteriously. Im not sure what is happening. Whethr browsing the net, make a call or simply navigate the phone..its often hang for 5 seconds and automatically restart. Does anyone have the same problem with me? Hi..ive changed my phone already. Anyway, in regards with the issues youre having on your Huawei Ascend G7, kindly try to do these steps and see whether the issues are fixed or not....
Chosen Solution my oppo reno 2 phone restarts after i input the pin password, last night i think i forgot to charge my phone and let it run all night and of course the battery drained. I charge it till 65% before opening it, then after a few minutes i input the pin password then my phone just freeze, still the power button function when i press it, it just locks then if i press it again, it won’t open....
Chosen Solution my Huawei p8 lite just switched off and cant get it back on. I tried to put it on charge and the red flickering light shows but it still wont switch on. also it keeps vibrating while on the charger. Hello Kanyisa Have you left charging the device for more than 6 hours? It is early for the battery to be damaged, but it depends on the use or if it has bad luck and is defective....
Chosen Solution Just recently cleaned corrosion off of the main board that was near where the battery connects and plugged every thing back in. Showed the charging symbol and LED for about 15 seconds and showed a temperature warning for about a minute. Now the phone is refusing to turn on or to even charge for that matter. Edit: I disconnected the battery and it did it repeated what it did above, only when the battery is disconnected....
Chosen Solution My epson artisan 837 printer will only pick up and feed plain paper. It won’t pick up photo paper. I have the same problem with my photo paper cassette tray. I also have the Epson 837 printer. I have been able to get my photos printed by using a work around solution. There is a small tab on both sides of the photo tray and it looks like one of the tabs has broken off....
Chosen Solution It looks like that thing predates modern “Switching” power supplies. That being said, it is therefore highly unlikely that you could convert it with just a soldering gun, a plug and some wire. If it was made for the US/North America market and you are now in Europe what you need is a step-down transformer. (Europe uses ~210V US is ~110) Creating a replacement power adapter board is beyond my pay grade If you do get an adapter, make sure it is a transformer....
Chosen Solution I installed windows 10 after installation, when powered on, it just blink light and off, it starts getting hot immediately. What should I do? It’s a security measurement, when the CPU overheats the PC immediately shut down to prevent further damage, so you need to : Check your fan if it spins or notClean the radiator (remove dust)Make sure there is nothing on the airflow path (intake & exhaust)
Chosen Solution It powers off then, and the golden battery connections get hot😟 VM Gaming start off with a new battery. If that still heats up you know your phone is having issues with the power management circuitry and will require that you take a good look at the circuit boards. One step at the time. Samsung Galaxy S4 Battery Replacement - iFixit Repair Guide
Chosen Solution As soon as I connect the earpiece with the cable, the proximity sensor no longer works. If I do not connect the earpiece the proximity sensor works without problems. The light sensor always works independently. Do you have any solutions? Have you tried a different speaker? or even a different prox flex?
Chosen Solution So, my touch screen wasn’t working (Only the touch part) so I ordered one from amazon since my brother wanted to try replacing it. The issue now is that when the phone boots up, the screen just produces a little feint light and nothing else. The touch screen works now, I can hear it. The weird thing is that if we boot it up with the old screen instead, unplug it and switch to the new one after it has opened it works fine....
Chosen Solution My Starbucks Barista Expresso machine is blowing the GFI??? Just started - can I repair or scrap it??? Thanks!!! Vic Hi Vik, It depends. If the problem started when you were descaling the machine, that can cause the GFCI to trip. Too much descaling chemical can cause a Ground Fault by conducting electricity through the water in the boiler to the chassis, which then trips the GFCI. The solution in this case is to replace all the water in the reservoir with clean filtered water, then plug the machine into an outlet that is NOT GFCI protected, and run the water through to clean out the descaling chemical....
Chosen Solution I’ve tried the official Nintendo guide and I’ve tried different HDMI cables. It has to be the chip that controls the TV stuff that’s broken. Anyone have a solution or alternatives so I don’t have to crack my switch open? Hi! .Has there been any water spilt on the switch at all or has it been dropped as these devives are quite flimsy and easily damaged. If nothing is working it could possibly be your dock if you have tried another dock and still nothing then it sounds like it is your p13 chip....
Chosen Solution What could be the problem? @asa bad valves, bad piston rings and numerous other thing could be an issue. If you can, let us know what model your Kohler is so we may find more information for you. Could be to much oil in it as well.
Chosen Solution I out a small load of clothes in the washer, started it and with 35 minutes left it just turned off and wont power back on. I have tried different outlets and still no luck. power runs to it when plugged in, but still won’t turn on. Any ideas why? Hi, Not sure what you meant when you said “…power runs to it when plugged in, but still won’t turn on....
Chosen Solution Does anyone know where I can get this kind of connector? It’s the DC Jack connector that’s soldered onto the mainboard. Hi, That should be a 0TM5N3 connector based on your Dell model. The model number is usually written on a white sticker on the DC connector’s plug. I marked it on your photo below. That connector seems fine to me (pins are still showing) and you could just solder it back to the motherboard....
Chosen Solution The LED screen on the back of my Canon 7D is cracked and needs to be replaced but I cannot find anywhere that this is a fix similar to fixing a phone screen. It seems the only repair is to remove the back of the camera and replace the entire LED itself. Do you know if it is possible to remove the back LED and replace it like some of the other Canon cameras?...
Chosen Solution the current situation screen not touch, but still lcd is onso I buy new screen lcd. (oem)new screen not working. black out.but original screen still is on. so i buy other new screen, but same black out problem. is this only lcd problem or motherboard? It depends where you bought them. They should have a return policy for these types of things. I would contact customer support and see if you get a refund....
