Chosen Solution My MacBook Pro won’t boot unless plugged in, when I do plug it in I don’t have to even press the power button for it to turn on. However after removing the charger it will turn off after 1 minute usually. It is showing that it’s charging, it’s currently at 80%. There’s also an issue with the screen, there’s a thick line that is high contrast, and when it gets hot it goes to a lower contrast....
Chosen Solution bottom agatater works but upper does not Upper Agitator How it Works: The upper agitator might be damaged or stripped out at the lower agitator connection point. Inspect the agitator for damage or wear around the connection point. Agitator Assembly To see parts for your washing machine, you need to enter your model number on the right. The system will then display parts that are associated with your washing machine....
Chosen Solution Hello! the tv I have is not the one noted on this post, the website is just making me pick one to post. Actual model number is 42LG50* My old ~10 year old LG flatscreen has started to have a problem after so many years and two moves. Whenever I go to turn it on or turn it off it will either take a long time to turn fully on or off (screen flickers on and off for a good 5+ minutes)....
Chosen Solution Hi everyone, I have a Huawei P30 Pro destroyed because it finished under a car. Mother board is a bit damaged, like fpc connectors, display is totally destroyed. Is possible recover data by chip off method? Or I’m obbligated to buy a new or used screen after repairing fpcs connectors). Client wants to recover photos. He didn’t have a Google backup of these photos. The phone has lock screen too....
Chosen Solution The phone is turning on, the display is working, everything is fine, but it’s not responding to touch. It has water all over the screen. Tap water went into it. It happened once previously and dried out itself. Even the camera has a fog in it. I am not up for completely disassembling it, as I am no professional. Hi , It will require a complete disassembly to ensure that all the water and the corrosion that has occurred and is ongoing is properly cleaned away....
Chosen Solution My Pioneer BDP-140 has worked flawlessly for around 8 years. However, lately when I insert CD-audio and DVD-video discs it just displays the message “UNK DISC” and refuses to play said discs (the discs do not even spin). Blu-ray discs playback is normal. Some things I already tried with no success: Loaded default settings Firmware reflash (v1.20) Firmware downgrades (v1.17, v1.10 and v1.08) Replaced entire loader assembly Any help would be greatly appreciated....
Chosen Solution Wondering how to fix the steam deck power button i press it to turn on the device but it doesn’t click or make contact with the inside of the device.Sometimes after like 10+ button presses it works it could be a simple solution Maybe it needs to be cleaned? It must not be making good contact, it does still work, so it’s prob not broken. Look at it and see if anything looks unusual
Chosen Solution My HP OfficeJet Pro printer often pauses and then stops partway through jobs, especially pdf files. Can you help? This is mostly a spooler problem.. you can try uninstalling the printer drivers then reinstall it Have you tried printing from another pc? Does it make copies fine? You may just need to reinstall the printer drivers on your computer. It’s likely fixed as much as software can fix it....
Chosen Solution Hello. I’m new here. I just signed up to ask for help. So i have this original PS4 for like 4 years now, it’s a CUH-1216A. It has been dropped and when i try to turn it on, it turns on, the fan spins for a split second, but after 5 seconds it turns off. I tried to add washers, it didn’t work. Also i’d like to mention that i’ve searched everywhere about this issue (google, youtube, reddit) and it seems like i’m the only one....
Chosen Solution So my Samsung Galaxy’s Tab A’s screen was shattered. It was working even after the screen was shattered. But it stopped charging after a while. I changed the screen and battery but it’s still not charging. I have a portable charger that normally indicates when it’s discharging but when I use it to charge the tablet, it doesn’t indicate any discharge. My initial thought is that the charging connection was damaged, but I have no clue how to test it or fix it....
Chosen Solution New 3DS XL Home button not working anymore, Do I have to start tearing it down? Yes, you need to buy a new home button and install it. If you have a bit of experience taking things apart it shouldn’t be much of a problem. If you’re not that confident you can also take it to a repair shop/send it to Nintendo. If it costs more than 20$, try to get it cheaper somewhere else because the replacement part is about 3$ and it would take me about 5min to fix it…...
Chosen Solution Using an iFixit battery and tools, I replaced my old iPhone 6 battery today. I’m an overly cautious, detail oriented, instructions following perfectionist. I was observed by the man who gave me those qualities, who has done a battery replacement of his own. I have reconnected everything twice. I currently have the old battery plugged into the phone and plugged into the charger. My screen is dead. No signs of life....
Chosen Solution I just purchased a new 6s screen & digitizer replacement and everything fit perfectly and plugged in great, although I am having issues with the touch responding on the right edge of the screen. Wondering if you guys know a fix for this or is this a defective digitizer under the glass? Thanks for your help.. Most likely a defective digitizer under the glass as you’ve said. Try reseating the screen connectors while the battery is unplugged and make sure there is no dust / debris on the screen connector pins on the board....
Chosen Solution Nintendo stated my device needed repair, but due to it being GameStop (whom won’t do anything about it) refurbished, they won’t touch it. Is there any guidance on what may be causeing the problem or how to repair it? I can’t justify the $299 for another Wii U as the Xbox One now costs the same. To clarify, the issue is verified to be the result of a hardware failure....
Chosen Solution Everything is working except I cannot get a live view to show on my iPhone. I can take photos and videos , they do show in my photos. wifi module as far as I can tell its inside the bird. im going through the same thing. but for android. the part is about 200.00$ It’s most likely the controller. There is a little silver box in the the inside of the controller (see image *credits to Lilly K) It’s the wireless module....
Chosen Solution When i press power button there is no display, and the battery led indicator the color is orange, how to fix my promblem, please help me. Thanks Blinking orange led says battery is dead. You need battery replacement. There is reset whole on the bottom RAM cover. Use staple wire to depress it. Laptop should boot after normally.
Chosen Solution Recently my 2011 EMC 2429 Intel i7 27” iMac was showing the flashing ‘?’ when attempting to boot. When trying to reinstall MacOS, disk utility was not showing my internal HDD. Upon further investigation I found out the iMac is not supplying the internal HDD with power thus the drive never spins up. Powering the internal HDD with an external SATA power supply allows the iMac to boot and run successfully with no issue....
Chosen Solution Hi, I am seeing No Service on my iPhone 3G for past few days. This is what i did till now- Erase all data on iphone. Reinstall IS 3.0 Jailbreak and Unlock it with Redsn0w and ultrasn0w. Reset network settings Airplane mode ON > OFF several times Disable 3G Reboot several times Tested SIM in another phone and another iPhone, works OK Modem Firmware- 04.26.08 Sometimes i see mu providers name for few second with zero bar and then again No Service....
Chosen Solution I recently dropped my iPhone 7 Plus since then it’s just searching even if there is no SIM card in it and there is no value for the modem-firmware. Is it possible that just some chips got knocked off? Very known issue, look at this for information, you might be able to get it fixed for free by apple. https://support.apple.com/iphone-7-no-se… Hi There the problem sounds like the antenna got damaged when you dropped your iPhone 7 so to resolve issue you would have to repair or replace the antenna on the handset and it should work after that repair has been completed and also recommend doing a factory restore of the hardware through iTunes so it can also update the firmware to the latest version which that phone can handle....
Chosen Solution I have a Sony KDL-46z4100 that won’t show a red stand-by light at all. TV will power on with a green light, but only with vertical lines, no sound and no ability to change the input or channels. I’ve purchased a few pre-owned boards, main boards, t-con boards and power supply boards off Ebay with no luck getting a standby light or the lines off the screen. Any suggestions on this would be greatly appreciated....
