Posts

Chosen Solution I followed the IFIX YouTube video to upgrade my storage to Samsung SSD storage, everything went smooth, I chose to restore from a backup I have on my TIME MACHINE external drive, but it is more than a day its stock on the booting page, white screen with apple icon. I tried one before but after more than a day I decided to redo the process and choose the other option in the beginning [INSTALL MACOS] instead of restore, it installed but the mac version was too old and I couldn’t update it, because whatever I tried to install or update I got an error that you need OS 10....

Chosen Solution Recently my PS4 when I turn it on no longer beeps, but it still works like it should. Is it normal for the Motherboard speaker to just die or no, and is there a way to restore it? While I wouldn’t say it’s normal it does happen. Yes, they can be replaced…you just have to desolder the old one and install a working one. I don’t know of anywhere to purchase new ones so I always just remove them from junk boards and install them into the good board....

Chosen Solution hello… I REALLY NEED HELP……. my ps4 slim was shut down because of rain and the disk was inside it, when i got power back i tried t start it but it blinks one time and i see a blue light but instantly the light gets off and it doesn’t works after that.. no sound of fan , or not beeping again even if i try to tap on the power button or the disk eject button, the i tried to plug my controller to ps4 and after trying the ps button of controller its blinking white light continuously … i have tried to unplug it several times, used different wall ports , removed it for 30 or more seconds but nothing is working…....

Chosen Solution My hipstreet pilot will not charge or turn on, can anybody help please? I had the same problem with my hipstreet pilot tablet. Try using some compressed air to blow out any debris from the charging port. If you don’t succeed try getting a paper clip and bend it so its straight, the get a torch and put the paper clip in, move it around and pull up. I used both and then charged it and it worked....

Chosen Solution The inside of my iMac G5 17" does not look like the one you have. What I assume is the PRAM batter is completely exposed. Can this be anything but the PRAM battery? First look on the bottom of your stand to get the exact model of your iMac. Your PRAM battery is probably covered by the airport card. You may need to remove the card to gain access to it....

Chosen Solution Hello there. I have a concern with my tablet – its screen won’t work, but the tablet itself works, the alarm I have set for every morning triggers, but it’s just the screen that won’t work. Any ideas? The display of my T580 stopped working from one day to the next. The device itself was still working though. I could access it via usb using adb. After opening the device I unplugged the black lcd ribbon cable stretched over the battery....

Chosen Solution My SMC reset isn’t working and the battery is also not charging, I tried changing the battery to see if it was faulty but the other one still wasn’t charging and I also changed the MagSafe but still it wasn’t charging The battery is now dead and it won’t start up, the MagSafe light is green, and the battery meter by the side (the one that has a tiny button) blinks 3 times then the last one fades out It also starts itself automatically when i plug the MagSafe and doesn’t boot up but it keeps beeping continuously (this started happening after I unplugged the battery indicator from the inside, i returned it but still) Please help!...

Chosen Solution The power went off all of a sudden, where can i take my speaker to be repaired… Hi @ski_kc06 , Search online for a reputable, professional electronics repair service that mention that they do audio equipment repairs and ask for a quote. Have you checked that the power outlet that the speaker is connected to is working by plugging in another appliance e.g. a hair dryer, to see if it was working?...

Chosen Solution Last night I was playing on my Switch, when out of nowhere it crashed, saying an error occurred. Now it won’t turn back on at all, no matter how long I hold the power button. The controllers still light up but the console is unresponsive. I practically always have it plugged into the charger, and over the years the cord has gotten a little damaged. I’ve been needing to charge it at an angle for it to work....

Chosen Solution My USB port suddenly stopped recognizing anything and I’m not sure what to do. Hi @valpop If you’ve verified that your USB devices are working when connected to USB ports on other devices then try resetting the Chromebook hardware and check if that resolves the problem. Turn of the laptop if it is on and then wait 30 seconds. Then press and hold the Refresh and Power keys (both together) and release the Refresh key when the laptop starts up....

Chosen Solution I need to power up my phone ZTE Max all I’m getting is a blue circle on the bottom of my phone blinking Try a hard reset. Google the instructions. Remember you will loose all your information. This would be my 1st step.

Chosen Solution I changed the screen because it cracked. When I first tried the screen it was fine and it worked. Then after a while the backlight didn’t work. The screen works and I can barely see things on the screen, but backlight is not working. I read there is a fuse that helps fix this issue but I don’t know if this will help. Here it is: http://www.mobilerdx.com/2015/03/sony-xp… It’s the first time the phone is opened and I never thouched the fuse because it’s underneath a metallic plate, which I didn’t even touch or moved....

Chosen Solution Upon booting up computer..no power brian kelley you do need to give us more information about what is actually going on with your computer. In the meantime check these things: Start by checking your diagnostics LEDs. There are four built-in diagnostic LEDs on the logic board that can help troubleshoot the computer. LEDs are located on the front center of the logic board, above the IR board, to the left of the SMC reset button....

Chosen Solution after changing the screen on an iphone 7 plus the home button would not click and the phone has gone slow as !&&* to the extent you cannot do anything i put the old screen back on and still not working any ideas? When you changed the screen did you unplug the battery? Made sure there was no ESD damage? If so, try a memory reset. This should work with at least the original screen....

Chosen Solution I have a 60” Samsung tv that had no i true or so started by replacing the main board and nothing, then the power board and nothing, last I replaced the T-con board and still nothing. when I plug it in the screen is just black but the backlights are on, the red light at the bottom corner is on and when I push the power button the red light fades out for second then comes back on solid, all the connections and wires seem to be intact and no damage....

Chosen Solution my samsung galaxy a02 has not been reading sim cards. it was working properly then one morning it just stoped reading sim cards and kept saying no simcard inserted Possibly the sim card slot is dirty or damaged, if the sim card isn’t the issue, it could be something else though Im not sure, sorry i don’t know more I donot know why it happen.. but when it happen I Do factory reset and it work

Chosen Solution I replaced a screen with a cracked LCD. After replacement touch is unresponsive. During startup, I am prompted to enter my password and after a few seconds I can do so. Once started up, the screen comes on, but I can not unlock the screen. It appears to respond to touch, because the notifications change color when selected, but it does not unlock or prompt me to put in my code to unlock....

Chosen Solution My game pad will turn my console on, I get a solid blue light and hear the disk drive so I believe the console is working, and the gamepad has to be synced if it turns the console on….my problem is I get no signal to my TV I’ve done multiple hmdi chords and inputs along with the original av cables. Now my gamepad is on the home screen and any button or action I take like trying to get into the settings it says cannot connect to the console power off and move closer…I just purchased a new wifi board for the gamepad hoping it’ll solve my issue… but can the wifi chip/ board I believe it’s 5 GHz be the reason I cannot get signal to my tv… any help would b greatly appreciated....

Chosen Solution I changed my mobile plan from post paid to prepaid and found no receiving calls and messages after changing the plan Hello johnson , Restart the phone and check whether you receive the calls & SMSs, if you experiencing same difficulties contact the relevant mobile carrier

Chosen Solution Hi, I would like to replace the 128 GB SSD blade in my Late iMac 20114 (15.1). I would like to replace it with a minimum 1TB blade, ideally a 2TB one. My understanding is that this iMac is limited to a x2 link width. So buying the latest and greatest (x4) would be limited by the x2 link?? So, my question is what would be the optimal speed specs of an SSD blade to be used in the system?...