Posts

Chosen Solution I have a 2009 polycarbonate macbook i installed el capitan on an ssd and used catalina patcher, after some time i removed the ssd and put in Some other hdd and made a el capitan bootable drive with transmac and when booting the macbook while pressing option key it doesn’t show the usb in the options Even tried uubyte and balena etcher but same result I don’t have any other mac except the same macbook’s mac os 10....

Chosen Solution Why do I need to reset the camera date every time I change the camera battery.? Is there any internal battery that I need to replace? Thanks. 画像はE-420ですが、メイン基板を取り外し裏側にリチウムイオン充電池があります。オリンパス機だと似たような位置にあると思います。 刻印は621です。

Chosen Solution I had to replace the lightning connector assembly on my iPhone 6 due to the lightning connector itself and the headphone jack wearing out. After doing so, I no longer have 3G or LTE signal. I checked my connections, and I believe that everything is properly connected. I do have an EDGE signal, and I can connect to WiFi without a problem. The new lightning connector also connects to my computer (charging the battery and allowing data transfer) successfully as well....

Chosen Solution I have an iPhone 6s. It would only charge if I bent the lead so I ordered a replacement charger port. I stripped the phone and fitted the new part but now my phone won’t turn on. Well, I think it’s on because I hear alerts but nothing on the screen. I thought it may be a problem with the screen but nothing shows up in itunes either. If I hold home/power itunes then says it needs to update....

Chosen Solution The Main in built screen does not give any display what so ever, its completely black. The unit turns on and gives the start up sound. It also can display to a external monitor connected through thunder bolt. I have replaced the screen with no luck and I have also replaced the led driver board with no luck. the logic board shows 4 green lights as well. any help would be appreciated!...

Chosen Solution eflw317tiw2 Electrolux stackable unit. Washer.. I’ve searched and searched for months on and off but now.. it’s A SERIOUS PROBLEM. From everything I can get my hands on this model has absolutely no clean out/drain pump filter. I shake everything vigorously even lint brush before going in wash, every last thing is shaken til I’m exhausted putting a load in.. my washer has fur and hair and lint and who knows what that should have been able to go in the drain pump filter and be cleaned out circulating through EVERY LOAD....

Chosen Solution Hello Team. I have watched and read many ideas on how to fix this and none seem to do it. I have replaced the T con and Main board to no avail. Not sure if maybe I got a bad board from ebay. I have sound but no picture or back light. I tried the flash light test but can’t see anything. When I unplug the connector from the power supply to the main board all led’s come on....

Chosen Solution I bought a generic chinese fan for this labtop and it makes a much higher pitched noise than the original Panasonic. Is this an installation issue or are these fans really of poor quality. If I move the computer around sometimes I hear it even rev down and stop then start up again. The pitch is also much louder than the original Panasonic one. Anyone know a good fan for this or should I try to find an original one from a broken computer?...

Chosen Solution Hi guys! I have a Hisense 43” non-4K TV screen panel that I’m looking to interchange with a Hisense 43” 4K tv screen panel that’s broken. Do you guys think this is possible? Thank you for your help! There are a lot of variables involved in swapping a screen out like this. Screen mount locations, driver and power ribbon locations, and if the electronics driving the screen are even capable of resolutions at 4k to name the big ones....

Chosen Solution device says searching for valid gps signal ,but does not find one? after i select destination,tomtom says waiting for valid gps signal from satalite?but waited a long time,no response?i’ve updated device on internet,but no change?pls help You need GPS Quickfix.

Chosen Solution No matter what i do, it will not turn on what so ever, i’ve tried to cord, works, i’ve tried undoing updates on the xbox, nothing. When i plug it in the light above home button flickers and still nothing. When i hold the bottom dpad the light stays on, and starts turning off and on again, but led’s arnt turning on and i cant do anything. I desperatly need help....

Chosen Solution https://docs.google.com/document/d/1-6in… Hi. I would like to know when you have the screen connected to the motherboard when the 3 pins are showing on the screen which one is the negative pin and which is the positive. Thank you for the help. Not sure what you mean by positive and negative but pins 1,3 and 5 (if you have a schematic or zxw) are anode and cathode 1 & 2....

Chosen Solution Right down the middle of my (LG) monitor), one side is tinted darker than the other. During the day the tinted side looks more purple, at night it is a tan-ish tint. It is still possible to see graphics and read text on both sides. My desk top computer is a Lenovo. How do I fix this? Hello jayeff - We tried the monitor on another computer and determined the problem was in the monitor....

Chosen Solution Hi, after screen replacement, home button is clicking, only when I lightly tap on it. I didn’t see any damages on the flex cable. Any solutions please? Hi! Maybe when you heating the screen the home button was damaged, I recommend you buy a new home button. Always I do this type of work I buy the screen with the button already included, it costs the same. I hope you can fix them....

Chosen Solution I replaced the battery on my iPhone 6. The phone was working great, but a day after the replacement, it stopped working altogether. Nothing will work. I opened the phone back up and checked the connections with the battery and screen connectors, and they are all secure. I tried plugging the phone in, and after a few minutes, it powered on like normal and gave the usual two vibrations to show that it was charging....

Chosen Solution Hello, my X5 stopped charging. I’ve already tried other wall charger without any success. Problem is not the battery since it can be charged externally. If i buy and replace this (http://mobilespart.com/doogee-x5-doogee-…) will solve my problem? Thank you guys. When you say you can charge it externally, you physically take it out and charge it in an external charger right? If that’s the case, it’s more than likely the charging port....

Chosen Solution I had lost my phone only to find it sitting in liquid. It had fallen off my chair and into a cleaning solution consisting of water and apple cider vinegar. Dont know for how long. Dont know how immersed for it was not I who found it. Now the screen is unstable in that its like a static screen on a tv in which you try to change the channel or get a better reception....

Chosen Solution Hi guys, I’m having some big issues with my old iPhone 5. First off I did a lock button and home button reset and it brought it to a new start up menu where I had to connect to wifi and restart the phone as I ‘restarted it’ which was unusual. But the device couldn’t find my sim so it wouldn’t start. So I taken matters into my own hands and as the phone got soap in it once I thought the insides could be hot....

Chosen Solution Hi, i just want to ask about my note8. Last night we went swimming and i always take photos using my note on or under water. But this time it did something different and the power option keeps on popping. So i took it out of the pool and let it dry. This time the phone still works fine no issues. But it was drupping water from the power button which concerns me so i just placed it at the table to dry out after an hour or so i tried using the phone but the screen wont turn ON....

Chosen Solution how do i fix my poloid flatscreen. it starts to fade to white seconds after i turn it on Often times, the capacitors in monitors and TV’s that are in the power supply will go bad and cause the display to act up as soon as they have time to charge. If you take apart the TV and look at the capacitors (Probably the tallest cylindrical component) and see that they have a slight or large bulge in the top of them that means they are bad....