Posts

Chosen Solution I put a brand new screen on my Mac and there is no display of any kind or even a startup chime anymore. It worked with the old broken screen but I no longer have it. Any ideas? Can you see the onboard diagnostic LED’s? What are they telling you (with the display connected) Here’s a breakdown of the onboard diagnostic LED’s: LED 1 - Indicates that the trickle voltage from the power supply is detected by the main logic board....

Chosen Solution I have an Iphone 6 plus, it just stop charging and is not detected by computer, put new fully charged battery (it turns on but is not charging and not detected by pc) try new charger cable, new ac adapter, even new charging port. nothing working please help. easiest indication of bad chip is to disconnect battery. then connect charging cable via mains power to charging port and see if Apple logo appears ....

Chosen Solution Hello, I replaced the hard drive on a Acer Aspire V5-571 due to the old one crashed and couldn’t boot anymore. It was a windows 8 but i installed a hard drive that has windows 7 installed on it. Now when i’m trying to boot, i just get the message “operating system not found”. I can’t seem to get it into bios or anything. Hernando @johnskinner , Just wondering if a power refresh would reset the BIOS back to default values?...

Chosen Solution I’d like to install this Pioneer DEH-P8400BH receiver in a ‘07 Honda Pilot. The Pioneer receiver is satellite-ready - using a separate Pioneer SiriusXM adapter. I found this adapter for connecting 3rd party receivers to factory antennas, but it apparently won’t work with an ‘07 Pilot. I’d like to keep things clean by using that built-in factory antenna. I’d be open to other options outside of using that particular model receiver....

Chosen Solution Hi, I bought the drone in 2016 and hardly used it for last few years. Now I have found that the battery has swollen. Please guide me how can I replace the battery. Please note I am in India. I will assume that your battery is a LiPo (Lithium=Polymer), Where did you have it stored when not in use? I’m betting it is a LiPo. Unlike NiCd batteries, LiPo batteries are environmentally friendly....

Chosen Solution i have a dodge durango and i have heated mirrors and i turn the defroster on and the passenger one does not heat up or defrost i do not know what the problem is. Is there a way that i can see what the problem is by my self without going to a dealer or store and having to pay money. I just want to see if i can troubleshoot the problem myself please help me with this....

Chosen Solution My phone is so much hanged Hi, Try using the phone in safe mode and check if the problem still occurs. If not then a downloaded app is the cause of the problem. The trick is to find out which one. You will need to uninstall each downloaded app, one by one and test the phone in normal mode between each uninstall. When it works OK the last downloaded app that was uninstalled was the cause of the problem....

Chosen Solution Sooo I have and S8 and S8+ doing screen repair on both. Now the phones will not come on, they only show triangle’s and will not charge. I know this was an issue with the thermostat on S4’s many years ago and had to change the charge port. I am not sure what needs to be done to fix this issue. I have a new cable and charge port on order but was not for sure if any one else has had this issue....

Chosen Solution My phone is in TalkBack and I can’t get out of it and I can’t get to my settings cuz my screen won’t slide Talkback mode is really hard to use when you are new to it but it helps blind people a lot. If you are unable to slide down the settings then use the app drawer to get into settings by sliding over the screen

Chosen Solution Afternoon all. So I just got this unit, SCPH-39003, turn it on all all displayed OK. Then after a few moments the images became corrupt. I thought it was a dodgy video lead but I’ve tried 3 and all having the same issues (one lead of which I know works). I have tried turning off the switch at the back and powering back on but no joy. I have tried with no controllers plugged in or memory cards and even another power lead but still having the same trouble....

Chosen Solution A few days ago, our ~65” VIZIO D650i-B2 television started power cycling; It turns on, shows the power indicator light, proceeds to show the Vizio Logo on the screen, and immediately acts as though it was unplugged and plugged back in. I have already taken all steps possible as the “User” to try and diagnose the possible problems. Unplugged it and plugged it back in. Used the power button versus the remote....

Chosen Solution Could anyone tell me why my xbox one power supply stopped working then suddenly works 3 months later? I plugged it in and let the block sit over night then olugged it in to the console the next morning. It didnt turn on right away. It only turned on when i accidentally touched the power button. Even though your power supply started working again, I do not recommend using it....

Chosen Solution Print-outs are not proper …. Ink is spread all over. If you have software for your printer(disc inside the box)you could try the option to realign the head of the printer. If that dosen’t work try different ink cartridges, if it still has problems have the bay and or printhead replaced or repaired. Hope this helps

Chosen Solution I have Panasonic TH-L42U30R I can’t change the Input the TV still in HDMI2 and I can’t change the volume from my remote or from the tv the remote turn on and off the tv and the tv work perfect put the command didn’t work what I can do. You could try to force the device to do a cold reboot by unplugging it from the power, waiting 10 seconds and then plugging it in again....

Chosen Solution Yesterday I put my S4 in charging … the battery was 0% power … I let it for 1 hour … but when I tried to turn it on … the phone doesn’t respond so what’s the problem ??? Your battery may have fallen so low that there isn’t enough power to even turn on the battery charging display and once it gets enough the power drain to light up the display keeps the battery from ever getting enough charge to power on....

Chosen Solution my sanyo model dt46840 has been working just fine until now it cut off and noe want cut back on not even the green power light @walters1995 on a completely dead set you want to test the power supply first. Of course make sure that your outlet has power and that your power cord works. After that you need to take the back of your set off and check the power supply fuses for power and continuity and see if you get power to the board....

Chosen Solution I closed the computer and stepped away when I came back and opened the image changed to a negative image Maybe you accidentally activated the ‘“invert colours” feature? Try to disable it by going to the following menu: Settings —> Accessibility —> Display —> Invert Colours I think there is a shortcut combination for this but I couldn’t find it immediately.

Chosen Solution I cant get past the choose a wifi.even when its connected it still wont go to my home screenwhat do i do oh and it dose have a key board u can hook up to If this is the case- Try factory reseting it again. Im understanding you mean you can’t get passed the introduction of the tablet where you enter the wifi right? If this is the case, you can’t get into the tablet and if thats the case you can’t factory reset it without having to actually get into the tablet- https://www....

Chosen Solution It run on OS 5.1 with AT&T. My question is, can you upgrade to the latest android versions? Can you unlock,so I could use my t_mobile sim? Thanks You cannot update to an official Android 7 or 8 release. Samsung simply didn’t make one. If you go to this forum, there are instructions where you can updated to a 3rd party version (which looks like the Nexus Androids). https://forum....

Chosen Solution My nano is fully charged and on but the wheel is not wroking. I press on menu or play and nothing happens. I tried to reset it by holding down the menu and select buttun but it did npot work First try restoring it on iTunes. but if that doesn’t work, it’s very probably it is bad hardware. Try replacing the clickwheel (and headphone jack/case assembly) but if that doesn’t do it, it’s a bad motherboard....