Chosen Solution My new replacement IFIXIT battery will not charge. Out of the box my multimeter read it at 3.81Vdc. I removed the replacement and reinstalled the OEM and confirmed that it would accept a charge. Tried my hand at the IFIXIT battery again just to rule out installation and still no dice. When I power up with the IFIXIT, my battery reads between 9-17% but if I let my phone auto lock it reboots itself....
Chosen Solution My iPhone 7 rear camera had dust inside the camera and was uncleanable, so I bought a replacement camera. Immediately after replacing the camera, I tested it and it worked fine, but several minutes later it just showed a black screen. After power cycling, the same thing happened, camera worked for several minutes, then stopped. I uninstalled and reinstalled the new camera two more times, just incase it didn’t get plugged in well....
Chosen Solution I changed the broken screen but it seems to have a back light problem can anyone help by telling me which components to check/change. all the iPads i look up with backlight problems look different than mine. PLEASE HELP. try disconnect it and wait for few seconds and back on, which will say all, the screen and battery, it might be that, but otherwise i would suspect the lcd is damaged....
Chosen Solution My samsung plasma 8000 65" tv no.longer works. No standby light no power. I was having issue weeks prior with the tv randomly shutting off but eventually i could get it back on. This time no light no nothing. I could use some help. Thanks @jcote it is likely you are having an issue with the power board. First unplug everything from the back of your TV. Disconnect everything that is plugged into it....
Chosen Solution Hi! Can someone please help me with my pixel 3? My problem: I have no wifi signal (I can’t even see any wifi networks). If I put the phone on the router still no signal. Also, I have no cell phone signal (GSM). Sim is detected but the phone shows “no service”. Sim is working (tested on another phone). Bluetooth works fine. The phone is not blacklisted. What I tested: Factory reset, update, flashing new firmware from google developers I also managed to connect the phone to the internet via reverse tethering (from my PC) and confirmed that it can still access google and other services....
Chosen Solution It will print via cable only to my pc. I checked the wireless network status and it’s perfect. All of the connection info is correct. The printer says it’s connected properly and should be working. I’ve uninstalled and reinstalled. What else???? How is your PC connected to the network? By cable or wirelessly? If by cable, then when you set up Epson software on a PC, you should choose ’ethernet’ or ‘wired’....
Chosen Solution I was using an old Toshiba Equium laptop as a DVR for a security cameras. This weekend I was going to tidy up my Television area as it was very messy! I unplugged everything and when I got to the laptop it suddenly shut down (before I touched it). then once I came back to plug it back in I pressed the on button and nothing happens, I tried again and accidentally hit the internet button and it fired up!...
Chosen Solution I´ve got my handy to get fixed at a local shop and when I got it back the technician assured that the problem was both the screen and the battery so they had changed them. The mobile continued not to work properly so I went back after a few days. Another guy attended me and helped me. When he opened the mobil he said that he could see that the original battery was still inside so that I had never got it changed....
Chosen Solution My phone powered down regularly after running out of juice and after charging (the phone showed no signs of charging even) however when powered on it is stuck on the BLU screen and will not go past that. I have not dropped or damaged the phone in any way and don’t understand how it just stopped working. try wiping cache partition
Chosen Solution I had an issue where after being on for a while… if I turned it off, it wouldn’t come back on, until I unplugged it for a while. The standby light would flash if I tried. It seemed thermal, so I removed the back and put a small fan back there. No issues for the last month. Tonight, while watching my Vikings get spanked (yet again), BANG! Small flash from behind the TV, and the sound was like one of those snap pop things youmthow on the concrete on the 4th of July....
Chosen Solution My yamaha keyboard plays for shot time and stops to produce sound even when power is on. To make it sound a gain I had to hit one of the speakers wire on one of the transistor. That left speaker as well doesnot work. This has been disturbing for the last 2 weeks. What could be the problem and how do I fix it? Update (06/15/2016) Here is the picture of the transistor that I rubb on....
Chosen Solution The power and volume buttons are broken, the tablet itself is turned off for some reason and I can’t turn it on. Is there any way to replace the buttons? What caused the issue? I dropped the tablet and it landed on its side, where the buttons are placed The power and volume buttons should be able to be replaced. They are soldered to the motherboard. A guide to removing the mother board for the 1st gen Shield tablet is below....
Chosen Solution I put in a new cartridge, but printer can’t detect it Is it an original or third party cartidge? Cause some printers simply won’t work with third party cartidges since they don’t recognize the chips on the cartridge.
Chosen Solution My smart key fob for a 2008 Prius no longer works as a remote. The physical key opens the door and when the fob is placed in the slot on the dash the car starts. I replaced the worn shell and the fob continued to worked for about 2 months. Then died. I’ve taken it to an auto locksmith. Opening the shell they witnessed the red light flashing on the circuit board when a button was pressed....
Chosen Solution Whenever I start a big game like FIFA or Warzone The fan kicks into high gear and does The fan kicks into high gear and and it beeps three times and turned itself off But there is no red light or overheating warning message on screen .I can play small size games and YouTube videos recently I openEd my PS4 to clean it and I miss placed A thermal pad and by mistake I Also erased A bit of thermal paste from the CPU chip....
Chosen Solution Why cant I use my tablet without a charger cord connected to my tablet? candissmith937, sounds like a bad battery. I’d start with that and see if that resolves your issues. Use this guide to replace it. This is another useless answer and my tablet will have to sit in my room for another five years of it being messed up My tablet won’t come on
Chosen Solution I recently just got an old N2000 from a local seller. Cleaned it up and added new batteries. I noticed that the shutter speed is the same throughout the dial. I get the same firing sound when shooting at 1/8 compared to 1/2000. Anyone know how to fix this or has anyone experienced this before? Did you ever figure out the issue Luke? I’m having the same problem with my N2000 and I can’t find a solution anywhere!...
Chosen Solution It’s a Mid 2012 13" 8 GB memory, Intel HD graphics 2.9 GHz Intel Core i7. I have 300 GB of unused space remaining. If I do a complete system recovery, what will happen to all of my software that I bought afterpurchasing computer? Will it all Just reinstall itself? For $90 at walmart, I just bought a 2 TB back up disk. I did a complete backup and it took 17 hours to complete....
Chosen Solution It says disabled for one hour how do I gain acess Update (09/11/2017) It’s my sister’s phone and she passed away I can’t figure out her passwords @stevo12209 unless a backup was made before, there isn’t a way to save your device’s data. You’ll need to erase your device, which deletes all of your data and settings. You could take it to Apple and explain the situation and possibly get some help....
Chosen Solution I replaced my battery with an ifixit kit, and it all went well. But I have already tried three times to calibrate it, just doing full battery cycles as instructed, but I still cannot get it properly. You can see in the screenshot the coconut stats. Am I supposed to just keep repeating the steps until it works or? Thanks! Contact the iFixit store to get your battery exchanged iFixit Customer Support
