Chosen Solution I have model cuh-1215a and can’t figure why my optical drive won’t insert or eject. I’ve check all fuses on the motherboard and they’re all good. I’ve tried the optical drive in another good ps4 with the same ribbon cables and it worked so I know it’s not the drive. I’ve checked the ribbon cable slots and those look clean too. I can manually insert a game and it will load OK when I restart the console....
Chosen Solution So, long story short, I recently bought an Early 2011 13" Macbook Pro. Everything’s working well, except for one thing, there is not any audio output or input at all. The single way I can output/input any sound is by connecting a BlueTooth device to my mac. And while that satisfies my needs, I’d like to try and resolve the audio issues with this device. This mac has the OpenCore Legacy Patcher applied to it, but I do not think that it affected the sound in any way, as it was absent even before applying that....
Chosen Solution So I just replaced the screen of an iPhone 5s. During the repair everything went good, no weird things. I did everything step by step as I always do. After closing the phone I connected it to a power cable, nothing happened. No charging sign nothing. It also doesn’t turns on. So I opened the phone again and checkt everything, it all looks good. Closed the phone again and as espected, nothing happened....
Chosen Solution Hi. I had my note 4 charging on a power strip while I slept. During my sleep, a power outage occurred. When I woke up, my phone wasn’t turning on even though it was still plugged in. However, there was a red LED light showing on the top left (which means low battery). I took out the battery and put it back in to completely shut down the phone....
Chosen Solution I bought a sony xperia e4 yesterday and it died on me so I put it on charge all night long and it still wont turn on.. the red light comes on to let me know its connected to a charger but all it does is show me a battery with red in it other than that it is dead any help??? Try new battery… It can happen when you let drain battery until 0%....
Chosen Solution I have updated the big sur to 11.5.1 but now my mackbook m1 power button which also works as touch id is behaving abnormally,whenever i press it my machine got turned off and i have to switch on it again,what should i do? I would contact Apple pronto! These laptops only released November of last year so as long as you haven’t liquid damaged it that system should still be under warranty, backup your files and then let them fix whatever is broken on their dime....
Chosen Solution Hi, I am using dell Dell Inspiron N5010 for the past 4 years, i had a battery backup problem too, Now i am facing problem with display when i power on, when i switch on the laptop the power led are glow but there is no display(black screen) and i am getting 8 beep sounds. I came to know it may be a LCD failure or motherboard or graphic chip set problem....
Chosen Solution Hello my friends, I own a Golf Mark 2 and I have a problem with the petrol exchange. The parts I changed did not solve the problem When the tank is full its go only 400 KM or less 20L of fuel only go 140 KM or 150KM max My engine is 1.8 8V ABS Carburettor wires for 1.4 8V My computer in the picture 1: spark plugs 2: coolant temperature sensor 3: internal fuel pump 4: sensor oxygen 5 : computer 6: I check if i have problems in mu computer no problems What can i do with this problem ?...
Chosen Solution this happened after i replaced magsafe plug, at first some of the keyboard buttons stopped responding, then i opened the laptop again and tried moving the flex cable of the keyboard, the problem remained but other buttons stopped working, then all of the keyboard, power button and trackpad stopped working, i could turn on the laptop without the power button by removing the battery and connecting the charger, it showed that there were no keyboard or trackpad connected....
Chosen Solution my Samsung Galaxy Tab2 10.1 is dead . not swiched on. Checked the battery it is okay. Voltage is 3.7 volt. expecting your reply Hold down the power button for 2 minutes for a hard reboot. Next, Try holding the power button and the lower volume button at the same time to reboot or reset.
Chosen Solution My alphasmart Neo says the unit must be returned for repairs right away. It was still working just fine as recently as two months ago, with all files intact from many years ago. Now when I turn it on it asks if I have replaced the battery, to which I reply no. It then tells me it is very important that I return the unit for repairs. Is this likely to be a battery issue only, or should I consider it dead?...
Chosen Solution My Card is not allowing me move files onto it and I still have quite a lot of space on it Backup / copy all files out as usual. Use another computer to test out. If the sd card protector switch is set to “not locked” and you are still having issues in formatting or writing new files, probably sd card is failing. what brand is your sd card?...
Chosen Solution I found a dell optiplex 7010 sff in a recycling center. It needs a hdd and optical drive caddy. I want to put one 2.5 ssd and one 2.5 2tb hdd in the desktop. Where can I get both the hard drive caddy for the two 2.5 drives and a optical drive caddy? I tried searching ebay and newegg but they only have one drive caddy. SSD is super light and doesn’t need a caddy....
Chosen Solution I am hard of hearing and I’m thinking about re-wiring a somewhat larger speaker to my kitchen timer. If I did so, would I get a LOUDER alarm ? I’m assuming that all speakers are low voltage “DC” current ? Hi @ramses2 , A larger speaker does not necessarily mean a louder sound. You may find that it will have an even quieter sound as the timer may not supply enough output current to drive the bigger speaker efficiently to produce the louder sound....
Chosen Solution Just installed a new power supply in my mid 2011 Imac 27. Upon powering up, within a few minutes the imac goes into sleep mode, it seems. If I hit a key, the screen comes back up. When the screen goes black (what I believe is sleep mode as stated above), I can hear the fans also shutting down. After relooking at everything, a few times, I reinstaleld my old power supply....
Chosen Solution I changed the charging coil and volume flex. After that I think I disconnected the NFC antena. Anyone has a tutorial on how to properly adjust it ? NFC cables are around the main camera, check the cables around it to see if they are properly screwed down and the contact washers are properly contacting the board.
Chosen Solution does anyone know where the antenna is on the iPhone 3GS, broke my screen and when i was changing it i took the board and battery out to look it it all, and know im getting no service, any ideas? you must have disconnected the antenna. its in the upper left corner. see the diagram and the logic board in the teardown. step 11: iPhone 3GS Teardown hi, in my case both antennas (bottom right und up left) are connected....
Chosen Solution I dropped my phone on the keyboard of my laptop and the screen went black. My laptop failed the built in LCD screen test. I did the FN test and I gotten 3 beeps. I looked at the wires after opening the laptop up but I don’t know how to check behind the LCD screen itself. The external monitor works and I did a system diagnostic test but it said 0 issues found....
Chosen Solution I have replaced thermal paste for my ps4 a week ago and afterwards it worked perfectly fine. Ran quieter, better heat exhaust, etc. But after a couple days of it running perfectly, my TV no longer gets a signal. When I turn the ps4 on a blue light flashes for a whole which eventually turns white, which if I am correct is how it normally boots up. I am just wondering if I might have messed something up or if it could be a problem with my HDMI and how to fix it....
Chosen Solution I cracked my Apple Watch 2 screen and replaced it with a new on my own. However, after the screen shift, the watch fails pairing to any watch. I have tried it a hundred timed on five different iPhones but it always fails. What might have gone wrong? The display shift was easy and was done without apparent problems. Thankful for input! Update (06/01/2018) I read here that the only way to get the watch to work again is to ‘reflash new firmware by ibus 2…’: http://forum....
