Posts

Chosen Solution Trying to start up old i-pod A1238 . Screen lights up with Apple on it, but won’t go on to menu or anything else You could try placing the iPod into recovery mode and restoring the software through iTunes, you will unfortunately loose anything on the iPod that hasn’t been synced. Make sure your iPod is turned on and connected to your computer. Press and hold the menu and select buttons for between 10 and 15 seconds (The iPod starts to reboot after about 5 seconds, keep holding the buttons until it seems to turn off completely) The display of your iPod should now stay black, and a new USB device called “USB DFU Device” should connect to your PC....

Chosen Solution Had this phone for 3 months and then the power button fell off. Any ideas for replacements? Someone asked for a picture, here is goes So I have the same issue! Although every time it has taken off I’ve been able to find it. It’s a tiny beveled rectangular piece with rubber straps on the back that are extended a bit outwards so you can fold one side inwards after placing another into the area where the button lays at a 45 degree angle(or less)....

Chosen Solution Pressing or squeezing the upper case between power button and delete key sometimes yields sleep/cancel/restart screen, at other times yields flashing of sleep light, although the G4 is not sleeping. Is the power button assembly replaceable apart from a complete upper case? Could simple shorting to ground be the problem? Keyboard lighting works as it should after either an OS update, or permissions repair. However, after the first sleep cycle after an update or permissions repair, keyboard lighting will not function at all-have to resort to Lab Tick manually....

Chosen Solution Printing is light in all colors and has horizontal lines through all print Most likely a Bad/Clogged print head. There should be a Clean Nozzle / Print Head option under Settings - Tools. Try that, there should also be an option for align print head. If Neither of those work the print heads are too badly clogged or have failed completely. You can try cleaning the print heads out with isopropyl alcohol too....

Chosen Solution my phone won’t wake up after 2-3 minutes the screen is off (locked screen) but when the screen is on everything works , but when i tried to press home + power button the phone is work again and after 2-3 min the screen is off my phone won’t wake up again Is your phone running the latest release of iOS? You could also try making a backup of your data and then restoring iOS to see if that solves the problem

Chosen Solution I just turned my samsung galaxy note 10.1 2014 on and it keeps saying unfortunately, samsung keyboard has stopped and there for I can’t do anything at all please help Switch to another keyboard in settings, you may have to download one from an app store. Use voice recognition when you can’t use the keyboard to type.

Chosen Solution I accidentally drop my switch lite I check if any of the buttons weren’t functioning. they all seem to be working perfectly fine but the R shoulder button feels a little stuck when I press it like something fell off inside. What should I do I check the L one it presses fine. Hi if it feels strange its most likely that something has moved,ypu will probably just need to put it back follow this guide until step 19 to sort everything out Nintendo Switch Lite Motherboard Replacement if you need any help please ask Thanks:-)...

Chosen Solution My nexus 7 tablet is locked. cant unlock it. There is an arrow at the bottom od the screen. Never seen it before. What is wrong? You can try using Wugfresh Nexus Toolkit. It’s an automated tool fixing stuff for Nexus devices, starting with the Galaxy Nexus. However, be warned that unlocking your Nexus device will wipe its contents: like you did a factory reset. My Nexus 7 first gen also went dead the other day....

Chosen Solution I bought a second hand Nest Thermostat and the battery will not charge. The info has a low lin reading of only 8. I know the unit is defective because I bought a brand new one and wired it the same and it works great with a lin reading of 200. Is the defective unit in need of a new battery? Or is it possible there is something wrong with the base?...

Chosen Solution I recently did a display replacement on a Surface Pro 4, and the touchscreen function now does not respond anymore. I noticed before the repair that the machine seemed to be sluggish generally, and didn’t respond to my touch as it should have. Does this sound like a hardware issue or a software issue? Should I reach out to the parts seller for another replacement? Just did a repair to one had the same issue....

Chosen Solution I replaced the glass/digitizer on my iPad Mimi 2 & all went reasonably well. Everything works properly, but the glass keeps popping up in a few spots. I was very disappointed in the instruction video as it made no reference to cleaning off the old adhesive or any instruction about reassembling the unit. It is not as simple as reversing the removal process! This unit may have some damage to the case, so the glass may be lifting because it is ever so slightly bowed?...

Chosen Solution I bought this fujitsu laptop last week and it’s very slow. It’s AMD E1 windows 10. Starting up is fast, but everything else is very slow. I even added another RAM but it’s still slow. One reason could be that it’s running on power-saving mode and the performance is being held back to conserve battery. Try putting it in high performance and check the results. Very common sometimes. You should consider: Buying 8GB DDR3 RAM....

Chosen Solution As the title states, I bought a brand new power supply for the display, but there is no voltage on any of the test points in the technician PDF. I am measuring between these test points and the LCD screw holes. Additionally, there isn’t any voltage between these contacts on the power supply and the LCD screw holes. Any suggestions? Thanks, Timothy Hi @warkentim Im not sure if the replacement powerboard is really working well, IMO when i see the power board pictures, something has caught on my eye, it might be glue or flux, but experts do feedback sometimes those glue can be conductive after some time of use, perhaps carefully scraping it off....

Chosen Solution I have a MacBook Pro 11,3. The external display works with no problems. The internal screen doesn’t. I’ve already replaced it but still no luck. Am I missing something important. It should also be noted that it is using a pretty old efi firmware version. Would that make a difference? So you did the test and don’t seen anything is that correct? Then you’ll need to look at the display connector area is the connector or the solder joints damaged?...

Chosen Solution My Macbook Pro 13" Late 2016 with touch bar Trackpad stopped having haptic feedback, so I changed the trackpad (but kept the cable), the trackpad touch works but still no haptics feedback. I did read it was probably the cable, would it be possible ?

Chosen Solution where is the sound card located Once i had same issue tried restore my sound driver. After restoring it was working but after half hour its gone forever. Again tried but this time it won’t enable. Finally i got heIpIine toII free (800) 585-2494 and got my problem solve. there was some malicious software which was stopping sound driver.You should also contact them. http://www.sony.co.in/support/download/4… —–download this 1st and then update it http://download....

Chosen Solution Hi guys, my display is not working anymore, the mac is working absolutely fine with an external screen, but I dont know what should replace the Display Datqa Cable or the LCD. thanks Update (01/22/2018) thanks for your answer men!, i will doit What does the flashlight test show you? Take a flashlight hold it on the screen at a sharp angle (about 20 degrees) are you able to see the faint image of the desktop and the icons?...

Chosen Solution Hello everybody from Italy, I’ve this old Sony Vaio VGN-NR21ZS (April, 2008) which apparently seems dead. The screen stays black, there is no post and no beeps, the power led stays on, the hdd led turns on for a few seconds as I attempt to turn the notebook on or whenever I press the power button - which I can still use to power off the notebook by holding it for some seconds....

Chosen Solution my power button is faulty and my phone can not turn on. is there a way of turning the phone on without the power button? my huawei mobile y520-u22 on-off baton not working give me solutions.

Chosen Solution Hello everyone, Recently my OnePlus 5 was on low battery at night, so I plugged it into the charger. When I woke up in the morning, the phone was dead and I could not turn it on anymore. This has been the state since then, I have not been able to turn it on and the phone also does not show a LED when plugged in to the charger etc....