Posts

Chosen Solution Hello! I’ve recently replaced the screen of my Huawei P30 Pro Dual-SIM (VOG-L29). Since that, I have a little less WiFi signal, but most importantly, my Bluetooth signal is very bad and every little move of my phone or the headphones makes it stutter and lose the connection. Both antenna flex-cables are attached. When I hold my hand close to the camera, the connection breaks instantly. No software changes did help....

Chosen Solution The power button on my Turbo 2 is starting to feel soft. Although still functional, it does not “click” when I press it. My guess is that’s about to fail. Is this repairable? This happened with my friend’s phone too. I sprayed windex on a tissue wiped around the button. Pressed it a few times, some more wiping with my nail pushing the damp tissue around the button. Dried it and that fixed the problem....

Chosen Solution On my laptop, the power button has a large backlash. I struggle that it will break. Can I replace it or what should I do? Hi, Is the laptop still covered by the manufacturer’s warranty? If so contact the manufacturer regarding the problem. Research online indicates that you are not alone in having problems with the power button. Some have had the problem resolved under warranty by the manufacturer replacing the power button board (with a refurbished button!...

Chosen Solution So i seen the power flex on this ipad was bad, could see there was a tear. So i replaced with another and of course the adhesive on it is terrible nothing wanted to stick in place. So i used a bit of super glue. Now Iam not sure if this caused an issue or not. When i first got it all connected and in place, I tested Boom Ipad comes on No problem....

Chosen Solution I recently got a Sunsui HDLCD4650 tv at a yard sale (For free) and I can’t figure out how to get it up and running. When plugged in, the standby red light comes on, and when when the power button is pressed, it turns green, But thats all it does. I tried connecting devices like my nintendo switch to all 3 of its HDMI ports, and I get nothing....

Chosen Solution I have a Canon Pixma Pro 9500 Mark II. It has been in storage for about 5 years. I set it up and the amber and blue light flashes. The amber light only flashes once. When I open the cover the print head does not move to the center. It has print cartridges that were stored in it. I unplugged it and tried to manually move the print head but it will not budge....

Chosen Solution There was a thunder storm and I was on YouTube. When the storm started I turn my system off, about an Hour later a quick power surge happened while my PS4 was off…An Hour after that I tried to my system on and it won’t respond to anything I try. I tired to change power cords, change outlets, Tried to put it in safe mode I even plugged my PS3 with my power cord to make sure that my cord was working....

Chosen Solution i have 3 large flares coming up from the bottom of the screen It is a little difficult to diagnose without seeing the issue so if you are able to provide a picture of the problem, that would help, but based on what you stated here and what I know to be more common failure points, my first suspicion would be an issue with the back-light. I have seen failing back-lights cause similar issues before....

Chosen Solution When I scanned any type of documents or even copy a documents, it has an output of thick horizontal line on the copied documents. What needs to be done to fix it? seems nothing showing dirty marks or anything that might create a line on the scanner bed. Is it hardware ? Most likely a speck, dirt or some foreign body on the Glass (the slender section of Glass) to the Left of the main Body of glass....

Chosen Solution Now the fabric softener doesn’t empty. Any ideas why? Is it showing any error codes? Listen to hear if it is giving a specific number of beeps. Meanwhile unplug it for 10 minutes to allow it to reset.

Chosen Solution I replaced my battery with new. All went well, plugged in charger and apple display went on for a moment and then out. Reconnected the new battery thinking maybe I had not fully connected it. Same result. Reinstalled the old battery and the phone starts as usual and charges and remains on after charger is disconnected. Reinstalled new battery and again no progress. Is this new battery bad? I have left it to charge quite a while 15-20 minutes and still no apple start-up display....

Chosen Solution I purchased a battery from IFixit in April. Ever since I installed the battery in my laptop, it will randomly shut down or go to sleep. I have tried resetting the SMC and PRAM and that hasn’t helped. It will shut down whether I use the batter or have it plugged in. This is very frustrating. Can I please get help on what I should do or if I can get a refund/replacement?...

Chosen Solution My tab 3 quit responding to touch, so i read that I should replace my screen. I bought a new one and carefully replaced it my self but now my screen is all lines and bottom corner is black. Does anyone know if this is fixable? I put the old screen back on but it didn’t change the screen having the same thing

Chosen Solution hi my nexus went swimming this weekend. i disassembled the phone and let it dry over 2 days at a radiator (40°C). After the reassembly, the phone works as before, does no longer charge when running though and quite slow when turned off. i may have damaged the battery a bit since i tried to take it out and bent it a bit. but still, phone does not discharge faster than normal....

Chosen Solution Hi all. I smashed the screen on my husbands iPad Air, not wanting to pay a small fortune to have it repaired I watched a YouTube vid and decided to do it myself, I did the replacement and followed all the steps but the screen is not working at all now, the iPad is on as when I plug in the charger it makes the noise that it does when you put it on charge but there is no picture or anything and I’m worried now as don’t want hubby to be mad that I’ve paid for a replacement screen and then to still have to pay someone to fix it....

Chosen Solution My iPhone 5s wont get any 2G signal inside the house which shows no service. But my Mother’s iPhone 5s which has same carrier gets full bar of 2G signal. While outside house my phone gets one bar of 2G signal. My Mother’s phone gets full signal. My phone works fine with 4G. Only 2G wont work. I already did network reset and did factory reset from ipsw file, still the problem remains....

Chosen Solution Hello all ! Someone gave me an iPhone 6 on iOS 11.3.1. On this iPhone 6 everything works just perfect except the sound during calls. When i call someone, he can’t hear me and i can’t hear him (even in speaker mode). Also the head-speaker and the micro are good. I have tested them with the voice memos. I have also noticed that when someone call me even after i hangout the phone keep vibrating ....

Chosen Solution Hi Guys, I run a repair store focusing mainly on Apple products. In the last few weeks I have encountered 5+ Iphone 6/6+ and 6s models all with the same problem. The problem is the Iphone is totally unresponsive, no charge being drawn when on charge, no itunes and no life even after several LCD + battery changes. I was told by one of the customers that they had had the same problem previously and a repair store had fixed it....

Chosen Solution My note 8 s pen broke. Can you share the technical data on the s pen? I would like to make my own better version of the s pen. I just need the specs or possibly source for the tiny circuit board inside the pen?? Thanks!! It isn’t that simple. The S-Pen has complex circuitry that generates a electromagnetic field that pulls power from the device you are using it on....

Chosen Solution System: Macbook pro 13" Mid 2012 2.9GHz i7. Graphics: Intel HD graphics 4000 opening Launchpad is too slow but over all machine runs fine when I use lightroom/photoshop. Booting time also increased - O/S is on SSD and all apps are installed on SSD. Occasionally system freezes. Need to hard boot. Took it to genius bar and they suggested that most probably motherboard is gone and they said it costs around $450 Is there any way it can be quick fixed without changing mother board and if need, is this something doable....