Posts

Chosen Solution I formatted my Wii, returning it to its factory state, and I then shut it down. Immediately after shutting it down, I remembered that there was a game disc still inside the system, so with everything still connected, I hit the eject button, which turned it on, but no picture or sound came from the TV. The disc didn’t come out at first, so I hit the eject button a couple of times quickly, with the disc coming out after maybe the second or third time, but still no picture or sound....

Chosen Solution Hi everyone! So after a hard reset, or network setting reset my iPhone 6 will stay connected to AT&T for a while(un sure of the exact time it disconnects, over 2 hours though). Then it says no service. While saying no service it can still read the IMEI number. While it has service, it will say full LTE bars but be as slow as 2 bars on 4g or so....

Chosen Solution Hi I recently replaced my charger port on my iPhone 5. I have got everything working but now there is no audio when playing music/videos I have took it apart and re installed the parts but still no sound - any ideas? Thanks Can be a defective chargin port flex. See if the flex speaker contacts stay in place and can make contact with the speaker. If that is right and they are in the place, next easy operation is to try with another speaker....

Chosen Solution when I am driving between 40 and 50mph it works fine but when over 50mph when you give the car gas it keeps kicking out of overdrive until the computer goes into default mod then it works fine It might pay to get a code reader on it & let us know what it tells you. Sounds like the transmission control computer is giving problems. Open it up & have a look for the obvious capacitor leakage problem with this one....

Chosen Solution Phone dead not charging tried several chargers, battery dead so not sure of phone will even turn on it was working last nite & battery went low now nothing Tried several chargers also it’s not responding I had similar problem, did you tried to clean the charging port. In my case it was full of dust. Same problem, i have an s6 non edge, and an iphone 6. I moved my sim card from samsung in iphone and put the s6 to charge....

Chosen Solution My phone randomly turned off. I held the power button, the home button, both of them at the same time, I tried the volume up button with the power button, I basically tried every combination of buttons I could, and it was completely blank. I plugged it in and got a battery charging sign, which alternated with the Samsung logo. I tried volume up + home + power button, and it started alternating between the Samsung logo screen and an “installing systems update” screen....

Chosen Solution I replaced phone battery, phone wasn’t turning on (was stock in DFU mode), iTunes detected phone and displayed model but serial number showed: N/A , I proceeded to do restore and upgrade but without installing the battery connector shield, iTunes started processing and downloading, phone turn on screen only the apple logo appeared it didn’t bootup. then new battery got warm and died too like the first battery. New battery was working and consuming 0....

Chosen Solution When I connect via USB it charges fine bur no PC I have ever connected to recognize the phone. My newer car gives the same message. Hi Debbie, There could be several reasons why your phone may not be recognized by a computer. I found an article that goes through all the possibilities and gives you solutions for them. LG V40 ThinQ won’t connect to PC? Just do this In a nutshell, here’s the list....

Chosen Solution So I swapped out my cracked iPhone 5 with a new replacement screen, and put in a new battery because last week the phone died it wouldn"t charge at all not even show the dead battery logo when pushin the power button. So my thing is before that the phone had a charging issue, it would only charge when powered off ans posistoned a certain way but it would die extremely fast even when on %100 Now that I swapped out the battery and screen it turned on and seems fine but I have black borders around the screen while its on, but as far the charging issue goes my phone turned off when I tried to go into Snapchat which it did in the past also plus the new battery doesn’t charge whiles its on I’m assuming at this point for the charging issue that it can be the charging port....

Chosen Solution First it started when I tried upgrading to windows 10. It didnt upgrade properly so the usb drivers went missing, tried to get it back by downloading rubbish driver pack online instead kept downloading virus. Long story short it gave me a blue screen saying no boot media or file found. Had to take it back to windows 7ultimate because it couldn’t find the windows 8.1 that originally came with it....

Chosen Solution I accidentally popped off the connector part of the flex cable, does anyone know how I can attach it back on? Tif properly only by soldering it back on. The solder pads look reasonable so it should be a straight forward solder job.

Chosen Solution Hi, on canon t3 power board - do i really need this big, electrolytic condenser? I got rid of flash an whole top case - can i just solder this cap out? We can remove this cap. Due to many pros answers i did it, and power board works as usual (excluding charging lamp :) best

Chosen Solution the power bar is making a very loud rattling noise when running. When I take the brush out of the unit, the noise stops I have found that fibers or hair get wrapped around the one end of the brush that has the silver ball bearing roller. The wrapping gets so tight and thick the ball bearing roller starts creating a rattle because it cannot roll freely. You need to take a tweezers and razor blade to clean out the ball bearing area....

Chosen Solution I just replaced the battery using instructions on this site and everything seems to be working except the Light/Proximity Sensor (the thing that turns the screen off when you hold the phone up to your face). Before I try tearing it down again, has anyone had any luck fixing this? I tried running the Light Sensor test (##3424##) and it registered a constant 4070 Lux. Not sure what that means....

Chosen Solution I was checking my brother’s PS2 slim and it wouldn’t turn on. The standby light was on when you plugged it in, but when you try turning on it will flip from green back to red and there is no sign of activity. I did some searching and most sources said it could be something with the motherboard. I disassembled the case and a piece fell out. I think I tracked down where it came off the board....

Chosen Solution My controllers for the PS3 will not turn on or charge full stop. I have tried resetting it and almost every other solution there is and nothing has happened. I really do not want to look at the battery which is something I have not done yet. Can somebody help? Clean the charge port with some rubbing alcohol Can be bad charge socket or bad battery

Chosen Solution I dropped my PSP in water couple years ago, and now I’ve found it and decided to fix it. But some parts are rusty (of course) and I just want to know if I can revive my PSP and how? Is it possible to revive? Most likely. Is it practical in terms of how much time and money it would take and the skills required? No unless you love electrical engineering like I do because I’m a firm believer that you can’t put a price on education and experience especially with stuff like this that isn’t very well documented....

Chosen Solution My samsung a 31 is not working Once a time I’m coming to home on that day There was heavy rain. My phone works correctly at that night. On morning it’s not working the screen is showing black… Sooo pls answer my question Hi, If the phone got wet due to the rain then there’s a chance that it got into the phone somehow and has caused the problem....

Chosen Solution As I was driving my speedometer and odometer both quit working is this something computerized or a cable that needs to be replaced? I do believe that this is computerized. All instruments are controlled by a computer/ If you have lost the speedometer, more than likely you have a bad speed sensor located in the top of the transmission. You can change yourself by unscrewing it from the transmission trans....

Chosen Solution Hello. Does anyone know where I can purchase a replacement adaptor and power cord for the CyberHome CH-LDV 712 DVD Player (almost new, purchased around 2006, but hardly used than one time)? I have misplaced the adaptor and power cord. Thanks, in advance, for any help. Camille Nixon, I believe the link below may work for your CyberHome CH-LDV 712 DVD Player. You can also do a search for better pricing perhaps....