Chosen Solution Hi, i have a LG G3 S (a.k.a. G3 Beat) with a backlight problem. The light is at 0 and won’t light at all. I can see barely something with some led light trough the display. I tried to restore with hard reset, changed the lcd but nothing. I was searching for a service manual for schematic pcb where this backlight ic is located but without success. The model is D722....
Chosen Solution I have been having an issue where every thing I click on in my settings menu doesnt open all I see is the com.android.settings crash notification, Recovery mode doesnt work and I cant do a factory reset because when I click on ANYTHING in settings I get that error this didnt happen until after I rooted my device and cleaned it at first it was just the app settings now its any settings I am beyond !...
Chosen Solution Hi, I was repairing the power cord on my hair dryer and accidentally disconnected a wire from its variable switch. When I tried to reattach it to what looked like the most logical terminal and I turned it on, it blew up. Now I’m not sure where to put the wire, any suggestions? All advice will be appreciated. Thanks! my bet is you shorted out the board, and if so you will need a new board, or frankly a new dryer....
Chosen Solution Hello, One of the controller ports on our NES Classic stopped working. We tried replacing the controller but it didn’t fix it so we figure it’s the port. Please help!! Your port pins are damaged consider it changing, if you are comfortable opening your console then open it and check if it is soldered to the board or connected to the pins check the port and order a new one easily available over online stores....
Chosen Solution others can’t hear me in audio calls of messenger. but, when the loudspeaker is on, they can hear me. everything seems to be just fine in WhatsApp audio calls. what should i do to fix the audio call problem in messenger? Hi, Try clearing the cache in the Messenger app and check if that resolves the problem. Go to Settings > Apps & notifications > See all apps > Select Messenger app > Storage > Clear cache
Chosen Solution It seems as though the phone is off but it still makes sounds when it is connected to the charger or when the volume is turned up. Is there anything we can do to fix it? Force a restart. There are two ways you can force a restart on your device: Press and hold the Power key (or Side key) and Volume down key for 20 seconds. On devices with removable batteries, remove the battery for 60 seconds, and then reinsert it....
Chosen Solution So a few weeks ago my Xperia started to have strange symptoms and shutting down suddenly. Battery level would show around 97% or so and then I’d put it down for a minute, it’d say 50% and then shut down right there. So I went and replaced the battery in it, and then also replaced the charging port. It’s acting a little better and I can usually get through my day without having it tethered to a battery pack, but it’s still doing it....
Chosen Solution The instructions and tools were great and replacing my iPhone 5s battery went smoothly. The phone had water damage but inside looked pristine with no signs of corrosion. I even took the phone apart twice to make sure I got all the connections tight and in their sockets. Still no response and a dead phone. I of course tried holding the Home and On buttons together for a long time and numerous times....
Chosen Solution yesterday i had a videochat call from messenger. I had this call about 2mins and then i saw i’ve got 8percents of battery. My phone usually drops from 8% to 2% but this is not the main problem. When i saw i had 8percents, i plug-in the charger to the wall and then plug-in the micro usb cable to the phone. After connecting, i got red diode but isomething very weird happend to screen....
Chosen Solution How much will it cost me to unlock my phone? What carrier is it? Also what is the model number? As long as the phone has the bills paid off and has been active on the network for more than a year, it should be eligible. oudie brian bonoan , Contact your carrier, they may or may not charge for the service, check the apple support link below. Good luck....
Chosen Solution I have a Phillips Model number 42pfl3603d/27, the back light was now working so I changed the board. Now the tv works except at random it will turn off then back on and off. Sometimes will stay on for 5 minutes then turn off and back on and off again. Other times it may stay on for 2-3 seconds and turn off and back on then back off. There is a clicking noise coming from the circled area in the picture....
Chosen Solution Hi, my son’s Xbox One S wouldn’t turn on yesterday evening. If he pushed the power button it would either beep and that’s it or the power button would light up but wouldn’t stay on very long. If he pushed the eject button it would beep too. It would also try to power on when he did that. (there was no CD inside) We unplugged the power cord. Waited more than 10 sec and tried again....
Chosen Solution Even after cleaning the heads the printer prints with white streaks. Cartridges are fine. The printer is getting old. Any repairable solutions? Try cleaning the rollers, often times I find the page feed slips which will cause the white area and if you do a solid colored area with a pale shade of blue you’ll see right beside the white streak a darker blue strap where the head ran across twice....
Chosen Solution Hi All , i have a surface pro 4 that wont power up ! Have been online and followed hard reset procedures but nothing . The only time i get any response is by holding power and volume up button for 15 secs , screen lights up for a few secs and then blank .. Purchased in the USA . Hi @kjc696 , Don’t know if you’ve seen this....
Chosen Solution error continues to state " incorrect printhead is installed please install correct printhead" Try resetting the appropriate settings per Canons Website. Canon Reset Switches you can open printer maintenance, and choose clean print head of canon mx922 driver and try to print again, it will show the right thing of work
Chosen Solution The button is stuck in the “pressed” position. To get my 3DS to respond as if it weren’t being press, I have to pull the edge of the button up. When it goes back down, I do not hear the clicking sound the other 3 shoulder buttons make when they’re pressed. The button is stuck down on the right, away from the center of the system. I’ve uploaded some images as well....
Chosen Solution Before It happened: I had a small crack for around 3 months now and I had no problems with it. Today, when I came home I threw my phone on the bed, gently like I do every day, I did not fall, It just bounced a bit and stayed there. It was not harder than usual or anything. Problem:Now around that small crack there are the colors: Red, Blue, Black and Green, Everywhere else on the screen It is just pixelated (like it would have a low resolution) and repeats the same thing Vertically....
Chosen Solution 97 f150 misses and backfires while ideling Bad sparkplug wires may be causing this. If a cylinder loses it’s spark for a few revolutions here and there fuel can build up and cause the backfiring.
Chosen Solution Replaced the motherboard and everything worked fine until the battery died. It was not charging while I had it plugged in. Now it is dead and will not take a charge and boot. There is no visible damage to the connector or wire from the USB/sound board. Does something on the board have to be reset for it to recognize the USB/ sound board? Well first things first , you need to get it powered up....
Chosen Solution Hey guys. So a few hours ago I spilled a small amount of water on my MacBook. I had the bottom case open as I was replacing the hard drive and had previously had issues installing macOS so I didn’t want to put it all back together until it was all up and running. A little bit of water must have splashed onto the board when I picked up my cup as I had no idea it was there until I returned back and saw the water....
