Posts

Chosen Solution Can anyone guide me how can i find the part number for motherboard. Thanks Update (02/13/2021) Hi Jayeff, thanks for your answer. That s true, no power on the front led. I attached a photo with the board. I don’t know which one is the fuse on this one, also can t find the printed number either. Update (02/13/2021) Hi, If there is no red standby power LED light on when power is connected to the TV have you checked that the fuse is OK on the TV’s power board?...

Chosen Solution This is the weird noise that it makes : All the drivers are updated Also 3 times in the last week the laptop made a buzzing noise and freez then go back to normal , 1 time it gave me a orange screen with some error . Hello Maybe the fan is too durty and even the processor is dry just try to clean it.

Chosen Solution During an evening of mixed video recording and burst mode the sound stopped recording - just total silence. I only noticed a couple of days later when I got to review the footage. No settings had been adjusted during the evening other than swapping video/burst. I contacted GoPro and they suggested to re-update firmware and send a sample video. Having examined the video they have accepted the camera as a return under warranty....

Chosen Solution I have a Officejet Pro 6968 series printer. It is not printing in black. I put in a new black HP cartridge. The color appears to be ok. I have tried to copy something and get a blank page. I have tried to print and nothing except color comes out. I have tried several cleanings and alignment. The printer doesn’t print in black. Ive had a different printer from HP have the same issue....

Chosen Solution I installed an original Apple Watch replacement battery this past Saturday (11/13), calibrated the battery and the watch worked perfectly for two days (I use the watch only to monitor my sleep). After fully charging the watch and wearing it to sleep Monday night, I woke up Tuesday with the watch down to only 10% charge. Chalking it up to a runaway watch app, I rebooted the watch, fully charged it, then wore it to sleep Tuesday night....

Chosen Solution Hello, My Panasonic Viera LCD that I’ve owned for five years recently has recently developed a problem displaying picture. However, the sound does still work. If I attempt to turn on the television the screen will light up grey but then go dark immediately. The stand by LED light stays a solid red from that point forward. I have attempted leaving it unplugged and then plugging it back in after a couple hours and I still have the same results....

Chosen Solution Hi,I have a Patagonia Nano Puff hoodie - this precise jacket : Patagonia Men’s Nano Puff® HoodyItem number is ITEM:84700SP13885657518715The bottom stop has fallen off the zip and I have lost it unfortunately. Are you able to refer me to the exact bottom stop I need to replace it? I can then follow the instructions in this video from Arcteryx: FIXED: Replacing Bottom Box - YouTube I have the zipper slider still which has the identification number YKK45c....

Chosen Solution there are some patches inside the screen and they looks like that there are some air bubbles Hi @priyalal, Has the laptop been dropped or gotten wet at all? Try the following to see if you can isolate the problem a bit more: i). Start the laptop in safe mode and check the display. If the display is now OK it may be a driver problem. Check that the graphic adapter drivers are up to date....

Chosen Solution if a receive a phone call and I have missed it I then try to return the call and it wont let me. Even if I put the number in manually it still cuts off same porble i think hardware or back to warrenty

Chosen Solution My phone is completely dead. I doesn’t turn on or do anything. When I plug it to the charger, the LED light turns but I am still unable to turn on the phone. Can someone please help me diagnose the issue?? Your phone may be powering on, but your LCD screen may have failed, so the phone works you just can’t see it. Try toggling the buzzer switch see if it reacts at all....

Chosen Solution My phone will not respond to the touch of my fingers. If I turn it off and let it set for a couple of minutes, I can get a few touches in and then it stops again. This problem started a couple of days ago, then I was notified by Samsung of a software update. After the update was installed, my phone worked fine, until just a few minutes ago and now it’s doing the same thing again....

Chosen Solution I did a screen repair on an iPhone 7 Plus and whenever I connect the front camera flex the phone just stays on the Apple logo but once I unplug it the phone turns on just fine never had this problem with any other iPhone before Most likely the front camera cable got damaged during removal from the old screen. You will need to try another replacement front camera assembly and make sure you buy from a reputable supplier such as iFixit, Mobile Defenders, Mobilesentrix or Injured Gadgets....

Chosen Solution Hello! I have a problem with my Xperia Z3 phone. Some time ago, I dropped it from less than knee height and when I picked it up the screen was completely black. However, the phone was working, I asked friends to call me and there was no problem, I could even take a picture with the side button(touch screen didn’t work). After searching for solutions I tried hard reset and even ordered a screen and replaced it - still the same problem, backlight lights up, phone works, but screen is black....

Chosen Solution I have a LG 60PN5700, about 5 or 6 years old, it works perfectly fine, but it seems if it is left on standby for an extended period it will power cycle when you attempt to turn it on. Leaving it unplugged for a few day seems to temporarily alleviate the issue. I can not see any visual issues on any of the boards, have tested all voltages and have not seen any out of range or fluctuating....

Chosen Solution Late 2009 iMac 27’ 1TB HD 16 GB RAM My iMac was fine until last week. I tried turning it on, it slowly loads about 3/4 of the way and then shuts off, restarts, and repeats the same issue over and over. Main things to mention: I’ve tried every boot method possible, nothing works ive tried Reset PRAM and smc. Holding Command+R while starting freezes the boot screen 3/4 of the way and the computer doesn’t shut off or do anything it just sits there at the white loading screen, I let it sit for over an hour and nothing happened....

Chosen Solution The power button clicks, and volume buttons work but power button doesnt turn on the screen. Replace the part or is it something else? The phone was dropped, screen got cracked. Hello Ed! It definitely sounds like you need a new screen for sure! Even small drops can be devastating for phones. The power button issue might be related to the drop as well. Good luck!

Chosen Solution my powerbot recently started to show this glitch where it actually runs pretending like it is cleaning but without actually vacuuming anything.(no powerbrush running) If i hit pause and then start again it starts and runs as expected. I’m not sure how often does this happen since it cleans mostly when I’m not home. I was only able to catch this on weekend. Mine begin doing the same thing....

Chosen Solution The above printer is getting switch off automatically. If the “Auto Power-Off Time” option is set, the machine will power off after it has been idle for the selected time period. Follow the instructions below to disable this option, by setting the “Auto Power-Off Time” to 0 minutes. For Windows: Connect the printer to the computer and turn the printer on.Open the [Devices and Printers] window. See “How to open the Devices and Printers window....

Chosen Solution The printer was flashing that I was out of Black ink, replaced with brand new cartridge and reset, but printer will not clear and accept new cartridge. Tried replacing the new one thinking maybe I had a faulty new cartridge, but it still will not accept the new cartridge (black). hi my epson 1400 recognises the cartridges but will not see them as full in the ink monitor

Chosen Solution Cannot select type of wash load, water temperature, or number of rinses. It only displays 0 spin 2 rinses. Hi @catls2@yahoo.com Have you tried disconnecting the power from the washer for about 5 -10 minutes and then reconnecting the power to check what happens, you didn’t say?