Posts

Chosen Solution This product was working. It has some age on it. Should I get a new power cord. Or is it possible that the board died? Hi, Unless the power cord looks old and tired, it is more likely that the problem is on the printer circuit board. Here’s the ifixit NeatDesk™ Desktop Scanner Circuit Board Repair guide that may help in finding the problem. If you decide to open the printer but can’t see anything obviously wrong with the circuit board after following the repair guide, post some close up images of both sides of the board back here....

Chosen Solution Maybe try this?:https://www.ebay.com/itm/B156HTN03-3-LED… It’s the best I could find that wasn’t out of stock. Good luck! Thanks. I’m a little suspicious of buying this on eBay because of their return policy but I may be forced to try it. Hate to get rid of the laptop just for this. It has an i7 and I upgraded to a 1 TB SSD and 16 GB RAM. Still runs great.

Chosen Solution I just replaced a cracked display (which was still responsive) with a new one (display and mid-frame combo). Everything works so far, but the touch-display itself stops responding every about 10 seconds for about 3-4 seconds at a time. Did you ever experience something like that? Have I done something wrong or could the new panel be faulty? A response would be highly appreciated. EDIT: The problem is a little reduced (though not gone completely) as long as the phone is connected to the loading cable....

Chosen Solution I have 2 N64s, I have plugged them in and tried multiple cartridges, it will power on with the red light and you can here the speakers kick on when i switch it on, but other then that I am getting no sound or video off of ether of them. I have tried 2 wires and even tried the wires on my Gamecube. The Gamecube works fine with no issue, but the N64s have no signal....

Chosen Solution I recently received a broken Macbook. I was informed that the Apple store said it needs a new logic board ($400-500). I was hoping to fix it for them for a little less. When you plug it in there is no light on the magsafe connector (tried two known good chargers). I tried unplugging the battery to do an SMC reset & also unplugging the IO board ribbon cable which was suggested online....

Chosen Solution Devant LED TV 32”. No display but has audio. Tried our luck the next day but appears to went worse as no display and has no audio as well. Already tried flashlight test, and still has very dim videos. It slipped in my mind that this may be because of a busted backlight (or maybe not), but what about the audio? Please help me out. Thanks. @laianne that is an off one since you still have audio....

Chosen Solution Hi there! I have the UE Megaboom and it doesn’t charge at all. Currently, it only turns on when it is connected via charger. Whenever i turn it on when its connected, and press the + and - buttons simultaneously to check the charge, it keeps saying its 40%. Also the charger LED does not turn on at all when connected. I know the LED itself is not blown as it was charging after some fluke but now its back to being turned off....

Chosen Solution Hi guys, I have an A1502 MacBook that had no keyboard and no touch pad, only the on/off button working. After reading through a number of threads I decided to order and replace the touch pad cable, this got the touch pad working but I still have no keyboard. Any ideas? The keyboard backlight is ok, and an external keyboard works ok. If I go to settings it’s telling me there is no keyboard present....

Chosen Solution my galaxy s3 will not turn on i think it has something to do with the OS system because it will go to the to regular turn on screens but after that will not turn back on Look up YouTube on how to get into recovery mode.. Take battery out put backin and press volume up the home and power button at same time and hold til it enter recovery mode from there it will give u options

Chosen Solution After replacing the battery successfully cannot obtain service for the phone by AT and T Try connecting the phone to wifi to resynchronize the date and time to current. Disconnecting the battery resets the date and time. If date and time isn’t set automatically then it’ll need to be turned on at settings > general > date/time. Then turn airplane mode on and off this usually fixes it if not turn phone on and on....

Chosen Solution I have no suction at the hose, but their is suction at the base gasket. I think it is clogged internally but don’t know how to get inside the vacuum. I just solved a similar problem with my model 9400 – it was clogged inside the plastic enclosure, and the tube did not have suction, with or without the upholstery tool attached. The floor part functioned properly. First I noticed that the sound this machine produced was changing when the round knob was turned to the “tool” position; to me it suggested that the air passage was clogged in this position of the knob....

Chosen Solution hello, i am not able to connect my wifi internet connection. though it was working before..though mobile data works…. tried some tips ,,,still not able to connect….can anyone please assist ? Thanks Check to see if yo may have accidentally turned on the airplane mode. checked it…though someone suggested to on/off …still not working …thanks

Chosen Solution Hi all my olympus C5000 zoom is not turning on I fixed some cold solder joint on the pcb but still the same error it looks like that the battery is losing power. I bought a new one but still the same problem what could be the problem it works sometimes and then I can make the best photos but later then its the ame problem any idea or a service manual?...

Chosen Solution My Galaxy Note 1 was working smoothly. All on a sudden on one morning the notification panel is not appearing when drawn down any times. A ll other touch screen features are working. How to set it right that my notification panel appears again. Restart the phone by holding power and hitting reset. If this does not work it may be a program. Also try Settings–>Applications–>All—>TouchwizHome—>Reset

Chosen Solution Hello! A while back, I dropped my phone in water and immediately disassembled it to dry it off. The symptoms were a screen that either worked perfectly after reboot and then turned black every time the screen was turned on, or a perfectly functional device except that the digitizer did not work. So, after reading some “advice”, I soaked my screen in 91% alcohol, leaving permanent marks. Then, I soaked the logic board in alcohol with a vibration assist from a washing machine....

Chosen Solution @honakrisi Here’s a picture, the white rectangle is where it broke off, also the little medal thing on the right side of the plug itself came off so I don’t know if that’s important or not Hi, This could be fixed, as just the solder joints broke off. The metal part on the right is just an ‘“anchor pin” that helps securing the connector to the board. If you solder the connector back, you may use a blob of hot glue on the right side to hold it in place....

Chosen Solution There is a blue haze on the screen when powered on. After following instructions from a Samsung tech by phone, I now have no sound nor picture. TV is 1 yr & 8 mos old!! You may be able to get Samsung warranty consideration since the set fairly new. The have a customer support number listed on the website (samsungparts.com). Do not use the Live Chat, they are useless....

Chosen Solution I am trying to change the battery on my Polar F11 fitness watch. When I removed the back cover on the watch I realized it was a little more difficult than I had expected. If someone has had experience for changing the battery in this device I would appreciate some help. Thanks Above post is incorrect. Once you remove the back cover you will see a metal tab covering the battery....

Chosen Solution After replacing the touch screen I find that in messages, the return button at upper left corner is sometimes inactive. usually, closing the app with home button and re-entering the app fixes it. I had several other similar experiences in other apps. is this hardware or software? I would lean towards a hardware issue. In particular the screen assembly . I have found in the past that the iPhone 6 Plus replacement have touch sensitivity issues due to the LCD ribbon cables not being fully seated in their respective socket....

Chosen Solution Recieved an iPhone 6s with with a non functional power on/off button. Will replacing the cable fix his? If Volume - and + work, and Lock Switch work probably a new flex cable can fix, and i say probably because can be internal liquid damage. You don’t have to take apart all the internal parts for testing if is only a new flex cable, in this picture you can see the location and connection of the power button flex, and you can test it before installing....