Chosen Solution My Epson XP-410 printer will not print. Says it must be connected to the WiFi which it is. I have installed a new driver and updated the firmware. When doc is put in queue is says error. This printer is the default. What do I do next? Make sure both printer and computer are on the same network, ( wireless). if they are add the printer to the computer and it should work....
Chosen Solution Hello, I have a macbook retina late 2013 and today when I was turning it on, I had a little difficulty because it was not turning on, but after a few tries I accomplished to make it function. The problem now is that the screen is flickering just like the image, but the intriguing fact is that it only flickers when I’m not moving the mouse/trackpad or typing, when I move the trackpad it stops completely....
Chosen Solution I have archos 7 home tablet, O.S android 2.1 (Eclair), I was trying to update the firmware but all of a sudden it went dead and I can’t get it to work again if possible any one can help. Thank you. just plug it into charger and push a pin into the reset hole on th back and it will reset.follow the touch screen calibration and your done...
Chosen Solution I have a Samsung model#un55eh6001f powering on and off constantly, power supply looks good no expanded caps, I already changed motherboard ran for 3 hours then same powering on and off. Thanks John twolittlebigfeet start of by disconnecting the motherboard rom the power board. Let us know if your backlight turns on and if the TV stays on. Let us also know how it turns on and off and if it does so by itself....
Chosen Solution Whenever I plug my Apple Earpods into my phone it recognizes that it’s plugged in but sound plays through my phone’s speakers instead of my earphones. The weird thing is that when plugged into my laptop they work fine. Does anyone know what’s going on? PS: I use them in an Android and a Windows 10 do other headphones work with your phone? might be your headphone jack, also could be pocket lint, which can be picked out with a needle
Chosen Solution I replace the ice maker on my Whirlpool refrigerator model GZ25FSRXYY2 a week ago after the old one would make ice but get stuck in the cycle. The new one has not made any ice and am looking for input. It is the correct ice maker and the wiring harness was replaced as well as part of the process. Update (10/16/2020) Thanks for the advice. It appears after doing some more checking that I’m not getting power from the refrigerator harness that connects to the icemaker harness....
Chosen Solution I have seen a similar question show up a million times but I have not seen a straight forward simple answer. My hard drive failed so I have decided to make an upgrade I picked up a new SSD (Samsung 860 with 500gb). I installed it into my computer but when it is starting to boot up I will get about 25-30% through the loading bar and then it goes black for a second and then a white screen....
Chosen Solution Everything on the receiver works except the fiber optic audio connection - so I have no sound to the speakers did you find the answer?? You will have to enable it through the Yellow Video cable Menu system. Raajit, is it a special driver or what? As far as I know, the fiber optic audio connection is a very sensitive thing. And I am not sure if the Yellow Video cable Menu system might be a solution on this problem....
Chosen Solution Replaced my screen easy, I’ve been replacing screens as a side business for 10+ years now. Unfortunately I only have backlight and no image on my new screen? The phone is turning on, has sound and vibration, and the backlight. Just no image?! I can’t find any information on this issue anywhere and wondered if someone here could shoot some ideas at me? Otherwise i’ll just have to ask for a replacement screen and hope this one was faulty!...
Chosen Solution I have an iPad Mini 2 that I’ve been troubleshooting and I’m afraid I have a bad dock connector. Any suggestions on how I can troubleshoot the connector? It was having problems charging (wouldn’t charge past 2-3% one day) and wouldn’t stay on for more than maybe 30 seconds. I put in a new battery and everything looked good. But it won’t respond at all when I plug in a cable (I tried several)....
Chosen Solution Does anyone have the same problem? What i have to do to be able to use the windows movie plaver for the clips from the polaroid cube? I don’t exactly know why, but VLC Media Player is the only thing I found to get sound. It’s not an editor though.
Chosen Solution My phone is 2 years old, and I’m now getting completely random letters and numbers when I try to type . I can’t even unlock the phone now as I can’t enter my password correctly. This is apparently a known issue with Motorolas, but I can’t find any fixes than the ones I have already tried, and which haven’t worked: Factory resetPutting the phone in the freezer to cool it Do you think replacing the screen will fix this?...
Chosen Solution Hello everyone my Samsung Galaxy S6 Edge Plus was factory data reset so it was flashed because of forgotten info with Google it powered back on but still had the FRP lock on it but the battery died and now will not power on after trying USB charging and wireless charging. The Samsung Wireless Charger shows it is charging but still will not come on. PLEASE HELP TIA...
Chosen Solution Checked with battery and charging port …still phone does not work ….works only when in charge else gets switched off change the battery but test it on your phone before maybe its a software problem !! the batteries in these phones have a safety circuit built into them the ZL had a bad production run at one point and this safety circuit goes faulty for no reason and when you unplug the phone from the charger it trips the circuit and the phone shuts off....
Chosen Solution What type USB-c cable can I use to replace a bent tip on my charger. I have a Thinkpad which was pulled off the couch by my cat. Stop laughing. The tip of the USB-C power cord bent when it fell onto the floor. I was able to bend it enough to have it work, but I would like to replace the tip. I am not scared of soldering, etc....
Chosen Solution printer always showing B203 ON A TS5020 CANON PIXMA . ANY IDEA TO CLEAR THE ERROR? Hi, See the Chosen Solution in this link and see if that resolves the problem canon mg6620 error b203
Chosen Solution I have a HP Photosmart C6280 printer and today when I was printing out a 5 page document (all of which contained items in red) it only printed the red color on the first page and left all the other red items blank on the other 4 pages. It has never done this before and I checked the ink cartridges and they all have ink in them with expiration dates of next year....
Chosen Solution I have a PS3 that is about 6 yrs old. I don’t game on it, just stream Netlix and stuff like that. The other day I turned it on and said to hook up controller via USB… well I’ve lost my controller because I only use the PS3 remote. From what I can tell by looking up it’s put itself in safe mode. Is there anything I can do without a controller and why would it do that?...
Chosen Solution I disassembled my ps4 slim to remplace thermal paste and to clean the disc drive but I forgot to take out a disc from the disc drive so I removed the metal plate from the disc and the cd and I cleaned the lens and opened the door manually using the plastic screw but when I powered it on it won’t take the drive the wheels won’t even spin it just does nothing And i noticed something when I powered it on a black game square with a disc symbol in it appeared for a moment and went away...
Chosen Solution My GoPro Hero 4 Black edition camera turns on and works okay, but the record button on the top and the wifi button on the side do not work. How can I fix these? Hey Did you pull out the cables between the outer casing and mother boards? More specifically the gold tipped smaller ones? This is normally the issue. If you dissemble the GoPro to the point where the mother board it free from the LCD board then you should be able to put this back in place and then put it all back together again (although it’s a little tricky) if that’s not fixed it then it could be a component part which needs to be replaced....
