Chosen Solution
Hello there! So my acer netbook seemed to phase in and out between where it would boot normally and it would be in this state. This state is where on pressing the power button it greets me with this Intel UNDI, PXE-2.0 build 083) Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.0.2.2(03/31/10) Check cable connection! PXE-M0F: Exiting Intel PXE ROM. No bootable device — insert boot disk and press any key I had just bought a new screen to replace my broken one on this poor netbook so I’m hoping that I could get this thing to boot so that I can use it again. Thanks!
Hey, i don’t know how techie you are, but if it’s not reading the ROM , simply thats a piece on the board, so either the hard drive is not connected fully, a connection isn’t fully connected, or worst of all the board is “fried" (prob not)… unplug & eject everything & plug it all back in, check the little metal connector pieces, make sure nothings bent wrong, or got a hair or a fuzzy where it connects… when 8n doubt, “Google” your problem… check this page too: Acer Aspire One D255E Troubleshooting -good luck..
