Chosen Solution
Okay, So I acquired this Mac in our shop. At first it would turn on load into the OS and then after a couples mins the screen will shut off but the unit would remain on. I was not able to reload it. The same thing would happen during the OS reload. After a couple days it stopped turning on in general. I opened the unit up and reset the battery. Works fine I was able to reload it and have no issues. Problem is now after using the computer for 30 mins to an hour it freezes. Crashes and then has the blinking folder icon. After mac diagnostics I got an error code NDC001 which is for the camera apparently. I’m wondering if anyone has had a similar isse or can further me towards a better method for diagnostics on the unit? I did not see any clear liquid damage or corrosion on the unit. It looks mint on the inside
It does sound like you may have multiple issues here. Lets first address the camera error NDC001 often times the connection on the logic board gets messed up either not fully inserted or corrosion. Referencing this guide MacBook Pro 13" Retina Display Early 2015 Logic Board Replacement jump down to Step 11 to make sure the logic board area is clean and the connector is making good contact. I suspect what maybe an issue here is someone did have a spill but it didn’t seep to the bottom side of the logic board which is what you normally see after taking the bottom cover off. You’ll really do need to fully remove it to inspect the other side.
